NtpCVEs & Vulnerabilities

praecis_parse in ntpd/refclock_palisade.c in NTP 4.2.8p15 has an out-of-bounds write. Any attack method would be complex, e.g., with a manipulated GPS receiver.

mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write when adding a '\0' character. An adversary may be able to attack a client ntpq process, but cannot attack ntpd.

mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write when copying the trailing number. An adversary may be able to attack a client ntpq process, but cannot attack ntpd.

mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write when adding a decimal point. An adversary may be able to attack a client ntpq process, but cannot attack ntpd.

mstolfp in libntp/mstolfp.c in NTP 4.2.8p15 has an out-of-bounds write in the cp<cpdec while loop. An adversary may be able to attack a client ntpq process, but cannot attack ntpd.

ntpd in ntp 4.2.8 before 4.2.8p15 and 4.3.x before 4.3.101 allows remote attackers to cause a denial of service (memory consumption) by sending packets, because memory is not freed in situations where a CMAC key is used and associated with a CMAC algorithm in the ntp.keys file.

ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 allows remote attackers to cause a denial of service (daemon exit or system time change) by predicting transmit timestamps for use in spoofed packets. The victim must be relying on unauthenticated IPv4 time sources. There must be an off-path attacker who can query time from the victim's ntpd instance.

ntpd in ntp 4.2.8p10, 4.2.8p11, 4.2.8p12 and 4.2.8p13 allow remote attackers to prevent a broadcast client from synchronizing its clock with a broadcast NTP server via soofed mode 3 and mode 5 packets. The attacker must either be a part of the same broadcast network or control a slave in that broadcast network that can capture certain required packets on the attacker's behalf and send them to the attacker.

ntpd in ntp before 4.2.8p14 and 4.3.x before 4.3.100 allows an off-path attacker to block unauthenticated synchronization via a server mode packet with a spoofed source IP address, because transmissions are rescheduled even when a packet lacks a valid origin timestamp.

Directory traversal vulnerability in the save_config function in ntpd in ntp_control.c in NTP before 4.2.8p4, when used on systems that do not use '\' or '/' characters for directory separation such as OpenVMS, allows remote authenticated users to overwrite arbitrary files.

An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GET_RESTRICT control message, which could let a malicious user obtain sensitive information.

NTP through 4.2.8p12 has a NULL Pointer Dereference.

Network Time Protocol (NTP), as specified in RFC 5905, uses port 123 even for modes where a fixed port number is not required, which makes it easier for remote attackers to conduct off-path attacks.

Stack-based buffer overflow in ntpq and ntpdc of NTP version 4.2.8p11 allows an attacker to achieve code execution or escalate to higher privileges via a long string as the argument for an IPv4 or IPv6 command-line parameter. NOTE: It is unclear whether there are any common situations in which ntpq or ntpdc is used with a command line from an untrusted source.

An exploitable denial of service vulnerability exists in the origin timestamp check functionality of ntpd 4.2.8p9. A specially crafted unauthenticated network packet can be used to reset the expected origin timestamp for target peers. Legitimate replies from targeted peers will fail the origin timestamp check (TEST2) causing the reply to be dropped and creating a denial of service condition.

Buffer overflow in the decodearr function in ntpq in ntp 4.2.8p6 through 4.2.8p10 allows remote attackers to execute arbitrary code by leveraging an ntpq query and sending a response with a crafted array.

The protocol engine in ntp 4.2.6 before 4.2.8p11 allows a remote attackers to cause a denial of service (disruption) by continually sending a packet with a zero-origin timestamp and source IP address of the "other side" of an interleaved association causing the victim ntpd to reset its association.

ntpd in ntp 4.2.8p4 before 4.2.8p11 drops bad packets before updating the "received" timestamp, which allows remote attackers to cause a denial of service (disruption) by sending a packet with a zero-origin timestamp causing the association to reset and setting the contents of the packet as the most recent timestamp. This issue is a result of an incomplete fix for CVE-2015-7704.

The ctl_getitem method in ntpd in ntp-4.2.8p6 before 4.2.8p11 allows remote attackers to cause a denial of service (out-of-bounds read) via a crafted mode 6 packet with a ntpd instance from 4.2.8p6 through 4.2.8p10.

ntpd in ntp 4.2.x before 4.2.8p7 and 4.3.x before 4.3.92 allows authenticated users that know the private symmetric key to create arbitrarily-many ephemeral associations in order to win the clock selection of ntpd and modify a victim's clock via a Sybil attack. This issue exists because of an incomplete fix for CVE-2016-1549.

ntpd in ntp before 4.2.8p3 with remote configuration enabled allows remote authenticated users with knowledge of the configuration password and access to a computer entrusted to perform remote configuration to cause a denial of service (service crash) via a NULL byte in a crafted configuration directive packet.

ntp-keygen in ntp 4.2.8px before 4.2.8p2-RC2 and 4.3.x before 4.3.12 does not generate MD5 keys with sufficient entropy on big endian machines when the lowest order byte of the temp variable is between 0x20 and 0x7f and not #, which might allow remote attackers to obtain the value of generated MD5 keys via a brute force attack with the 93 possible keys.

Crypto-NAK packets in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to bypass authentication.

The decodenetnum function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (assertion failure) via a 6 or mode 7 packet containing a long data value.

Buffer overflow in the password management functionality in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (daemon crash) or possibly execute arbitrary code via a crafted key file.

The datalen parameter in the refclock driver in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to execute arbitrary code or cause a denial of service (crash) via a negative input value.

ntpq in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted mode 6 response packets.

ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to cause a denial of service (infinite loop or crash) by pointing the key file at the log file.

Use-after-free vulnerability in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote authenticated users to possibly execute arbitrary code or cause a denial of service (crash) via crafted packets.

The rate limiting feature in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to have unspecified impact via a large number of crafted requests.

The ntpd client in NTP 4.x before 4.2.8p4 and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service via a number of crafted "KOD" messages.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

Memory leak in the CRYPTO_ASSOC function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (memory consumption).

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash). NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

The crypto_xmit function in ntpd in NTP 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77 allows remote attackers to cause a denial of service (crash) via crafted packets containing particular autokey operations. NOTE: This vulnerability exists due to an incomplete fix for CVE-2014-9750.

The "pidfile" or "driftfile" directives in NTP ntpd 4.2.x before 4.2.8p4, and 4.3.x before 4.3.77, when ntpd is configured to allow remote configuration, allows remote attackers with an IP address that is allowed to send configuration requests, and with knowledge of the remote configuration password to write to arbitrary files via the :config command.

The panic_gate check in NTP before 4.2.8p5 is only re-enabled after the first change to the system clock that was greater than 128 milliseconds by default, which allows remote attackers to set NTP to an arbitrary time when started with the -g option, or to alter the time by up to 900 seconds otherwise by responding to an unspecified number of requests from trusted sources, and leveraging a resulting denial of service (abort and restart).

The ULOGTOD function in ntp.d in SNTP before 4.2.7p366 does not properly perform type conversions from a precision value to a double, which allows remote attackers to cause a denial of service (infinite loop) via a crafted NTP packet.

ntp_openssl.m4 in ntpd in NTP before 4.2.7p112 allows remote attackers to cause a denial of service (segmentation fault) via a crafted statistics or filegen configuration command that is not enabled during compilation.

The log_config_command function in ntp_parser.y in ntpd in NTP before 4.2.7p42 allows remote attackers to cause a denial of service (ntpd crash) via crafted logconfig commands.

NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote attackers to cause a denial of service (ntpd crash) via a malformed mode configuration directive.

NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote authenticated users to cause a denial of service (daemon crash) via an invalid setting in a :config directive, related to the unpeer option.

Buffer overflow in the legacy Datum Programmable Time Server (DPTS) refclock driver in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via a crafted /dev/datum device.

Stack-based buffer overflow in the reslist function in ntpq in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows remote servers have unspecified impact via a long flagstr variable in a restriction list response.

The Windows installer for NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via vectors related to an argument with multiple null bytes.

Multiple buffer overflows in the ctl_put* functions in NTP before 4.2.8p10 and 4.3.x before 4.3.94 allow remote authenticated users to have unspecified impact via a long variable.

NTP before 4.2.8p10 and 4.3.x before 4.3.94, when using PPSAPI, allows local users to gain privileges via a DLL in the PPSAPI_DLLS environment variable.

Stack-based buffer overflow in the Windows installer for NTP before 4.2.8p10 and 4.3.x before 4.3.94 allows local users to have unspecified impact via an application path on the command line.