CVE Database

CVSS 7.8
EPSS 0.03%
Priority 0
CWE CWE-416

Acrobat Reader versions 24.001.30365, 26.001.21651 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 7.8
EPSS 0.03%
Priority 0
CWE CWE-416

Acrobat Reader versions 24.001.30365, 26.001.21651 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 7.8
EPSS 0.01%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: rust_binder: avoid reading the written value in offsets array When sending a transaction, its offsets array is first copied into the target proc's vma, and then the values are read back from there. This is normally fine because the vma is a read-only mapping, so the target process cannot change the value under us. However, if the target process somehow gains the ability to write to its own vma, it could change the offset before it's read back, causing the kernel to misinterpret what the sender meant. If the sender happens to send a payload with a specific shape, this could in the worst case lead to the receiver being able to privilege escalate into the sender. The intent is that gaining the ability to change the read-only vma of your own process should not be exploitable, so remove this TOCTOU read even though it's unexploitable without another Binder bug.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-416

Memory Corruption when using deprecated DMABUF IOCTL calls to manage video memory.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-126

Memory Corruption when processing auxiliary sensor input/output control commands with insufficient buffer size validation.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-126

Memory Corruption when accessing an output buffer without validating its size during IOCTL processing.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-126

Memory Corruption when retrieving output buffer with insufficient size validation.

CVSS 7.8
EPSS 0.01%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: check if target buffer list is still legacy on recycle There's a gap between when the buffer was grabbed and when it potentially gets recycled, where if the list is empty, someone could've upgraded it to a ring provided type. This can happen if the request is forced via io-wq. The legacy recycling is missing checking if the buffer_list still exists, and if it's of the correct type. Add those checks.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-126

Memory corruption while preprocessing IOCTL request in JPEG driver.

CVSS 7.8
EPSS 0.01%
Priority 0

A stack buffer overflow vulnerability exists in the Wincor Nixdorf wnBios64.sys kernel driver (version 1.2.0.0) in the IOCTL handler for code 0x80102058. The vulnerability is caused by missing bounds checking on the user-controlled Options parameter before copying data into a 40-byte stack buffer (Src[40]) using memmove. An attacker with local access can exploit this vulnerability by sending a crafted IOCTL request with Options > 40, causing a stack buffer overflow that may lead to kernel code execution, local privilege escalation, or denial of service (system crash). Additionally, the same IOCTL handler can leak kernel addresses and other sensitive stack data when reading beyond the buffer boundaries.

CVSS 7.8
EPSS 0.02%
Priority 0

The issue was addressed with improved memory handling. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An app may be able to cause unexpected system termination or corrupt kernel memory.

CVSS 7.8
EPSS 0.01%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: rust_binder: check ownership before using vma When installing missing pages (or zapping them), Rust Binder will look up the vma in the mm by address, and then call vm_insert_page (or zap_page_range_single). However, if the vma is closed and replaced with a different vma at the same address, this can lead to Rust Binder installing pages into the wrong vma. By installing the page into a writable vma, it becomes possible to write to your own binder pages, which are normally read-only. Although you're not supposed to be able to write to those pages, the intent behind the design of Rust Binder is that even if you get that ability, it should not lead to anything bad. Unfortunately, due to another bug, that is not the case. To fix this, store a pointer in vm_private_data and check that the vma returned by vma_lookup() has the right vm_ops and vm_private_data before trying to use the vma. This should ensure that Rust Binder will refuse to interact with any other VMA. The plan is to introduce more vma abstractions to avoid this unsafe access to vm_ops and vm_private_data, but for now let's start with the simplest possible fix. C Binder performs the same check in a slightly different way: it provides a vm_ops->close that sets a boolean to true, then checks that boolean after calling vma_lookup(), but this is more fragile than the solution in this patch. (We probably still want to do both, but the vm_ops->close callback will be added later as part of the follow-up vma API changes.) It's still possible to remap the vma so that pages appear in the right vma, but at the wrong offset, but this is a separate issue and will be fixed when Rust Binder gets a vm_ops->close callback.

CVSS 7.8
EPSS 0.02%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading an inode from disk, ocfs2_validate_inode_block() performs various sanity checks but does not validate the size of inline data. If the filesystem is corrupted, an inode's i_size can exceed the actual inline data capacity (id_count). This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data buffer, triggering a use-after-free when accessing directory entries from freed memory. In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typically <256 bytes - A garbage rec_len (54648) caused ctx->pos to jump out of bounds - This triggered a UAF in ocfs2_check_dir_entry() Fix by adding a validation check in ocfs2_validate_inode_block() to ensure inodes with inline data have i_size <= id_count. This catches the corruption early during inode read and prevents all downstream code from operating on invalid data.

CVSS 7.8
EPSS 0.01%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: fix race conditions in sco_sock_connect() sco_sock_connect() checks sk_state and sk_type without holding the socket lock. Two concurrent connect() syscalls on the same socket can both pass the check and enter sco_connect(), leading to use-after-free. The buggy scenario involves three participants and was confirmed with additional logging instrumentation: Thread A (connect): HCI disconnect: Thread B (connect): sco_sock_connect(sk) sco_sock_connect(sk) sk_state==BT_OPEN sk_state==BT_OPEN (pass, no lock) (pass, no lock) sco_connect(sk): sco_connect(sk): hci_dev_lock hci_dev_lock hci_connect_sco <- blocked -> hcon1 sco_conn_add->conn1 lock_sock(sk) sco_chan_add: conn1->sk = sk sk->conn = conn1 sk_state=BT_CONNECT release_sock hci_dev_unlock hci_dev_lock sco_conn_del: lock_sock(sk) sco_chan_del: sk->conn=NULL conn1->sk=NULL sk_state= BT_CLOSED SOCK_ZAPPED release_sock hci_dev_unlock (unblocked) hci_connect_sco -> hcon2 sco_conn_add -> conn2 lock_sock(sk) sco_chan_add: sk->conn=conn2 sk_state= BT_CONNECT // zombie sk! release_sock hci_dev_unlock Thread B revives a BT_CLOSED + SOCK_ZAPPED socket back to BT_CONNECT. Subsequent cleanup triggers double sock_put() and use-after-free. Meanwhile conn1 is leaked as it was orphaned when sco_conn_del() cleared the association. Fix this by: - Moving lock_sock() before the sk_state/sk_type checks in sco_sock_connect() to serialize concurrent connect attempts - Fixing the sk_type != SOCK_SEQPACKET check to actually return the error instead of just assigning it - Adding a state re-check in sco_connect() after lock_sock() to catch state changes during the window between the locks - Adding sco_pi(sk)->conn check in sco_chan_add() to prevent double-attach of a socket to multiple connections - Adding hci_conn_drop() on sco_chan_add failure to prevent HCI connection leaks

CVSS 7.8
EPSS 0.04%
Priority 0
CWE CWE-416

Use after free in Windows Universal Plug and Play (UPnP) Device Host allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.16%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: bail out on template ct in get eval I noticed this issue while looking at a historic syzbot report [1]. A rule like the one below is enough to trigger the bug: table ip t { chain pre { type filter hook prerouting priority raw; ct zone set 1 ct original saddr 1.2.3.4 accept } } The first expression attaches a per-cpu template ct via nft_ct_set_zone_eval() (nf_ct_tmpl_alloc -> kzalloc, tuple is all zero, nf_ct_l3num(ct) == 0). The next expression then calls nft_ct_get_eval() on the same skb, treats the template as a real ct and hits the 16-byte memcpy path. With dreg at NFT_REG32_15 this overflows past struct nft_regs on the kernel stack; with smaller dreg values it silently clobbers adjacent registers. Reject template ct at the eval entry and in nft_ct_get_fast_eval(), mirroring the check nft_ct_set_eval() already has. Additionally, bound the address copy in NFT_CT_SRC / NFT_CT_DST by priv->len instead of by nf_ct_l3num(ct): nf_ct_get_tuple() zeroes the tuple before pkt_to_tuple() fills in only the protocol-relevant leading bytes, so the trailing bytes of tuple->{src,dst}.u3.all are well-defined zero. priv->len is validated at rule load, so the copy size is now bounded by the destination register rather than by an untrusted field on the conntrack. [1]: https://syzkaller.appspot.com/bug?id=389cf09cb72926114fce90dc85a2c3231dcb647c

CVSS 7.8
EPSS 0.03%
Priority 0
CWE CWE-121

InDesign Desktop versions 21.3, 20.5.3 and earlier are affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-427

ZTE Cloud PC client uSmartView contains a DLL hijacking vulnerability; since uSmartViewServiceAgent.exe runs with SYSTEM privileges, successful hijacking enables local arbitrary code execution, privilege escalation, and memory corruption.contains a DLL hijacking vulnerability; since uSmartViewServiceAgent.exe runs with SYSTEM privileges, successful hijacking enables local arbitrary code execution, privilege escalation, and memory corruption.

CVSS 7.8
EPSS 0.04%
Priority 0
CWE CWE-416

Use after free in Desktop Window Manager allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.04%
Priority 0
CWE CWE-416

Use after free in Desktop Window Manager allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS
Priority 0
CWE CWE-122

Windows Universal Disk Format File System Driver (UDFS) Elevation of Privilege Vulnerability

CVSS 7.8
EPSS 0.04%
Priority 0
CWE CWE-362

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Push Notifications allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.01%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: bonding: fix type confusion in bond_setup_by_slave() kernel BUG at net/core/skbuff.c:2306! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:pskb_expand_head+0xa08/0xfe0 net/core/skbuff.c:2306 RSP: 0018:ffffc90004aff760 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88807e3c8780 RCX: ffffffff89593e0e RDX: ffff88807b7c4900 RSI: ffffffff89594747 RDI: ffff88807b7c4900 RBP: 0000000000000820 R08: 0000000000000005 R09: 0000000000000000 R10: 00000000961a63e0 R11: 0000000000000000 R12: ffff88807e3c8780 R13: 00000000961a6560 R14: dffffc0000000000 R15: 00000000961a63e0 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1a0ed8df0 CR3: 000000002d816000 CR4: 00000000003526f0 Call Trace: <TASK> ipgre_header+0xdd/0x540 net/ipv4/ip_gre.c:900 dev_hard_header include/linux/netdevice.h:3439 [inline] packet_snd net/packet/af_packet.c:3028 [inline] packet_sendmsg+0x3ae5/0x53c0 net/packet/af_packet.c:3108 sock_sendmsg_nosec net/socket.c:727 [inline] __sock_sendmsg net/socket.c:742 [inline] ____sys_sendmsg+0xa54/0xc30 net/socket.c:2592 ___sys_sendmsg+0x190/0x1e0 net/socket.c:2646 __sys_sendmsg+0x170/0x220 net/socket.c:2678 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x106/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fe1a0e6c1a9 When a non-Ethernet device (e.g. GRE tunnel) is enslaved to a bond, bond_setup_by_slave() directly copies the slave's header_ops to the bond device: bond_dev->header_ops = slave_dev->header_ops; This causes a type confusion when dev_hard_header() is later called on the bond device. Functions like ipgre_header(), ip6gre_header(),all use netdev_priv(dev) to access their device-specific private data. When called with the bond device, netdev_priv() returns the bond's private data (struct bonding) instead of the expected type (e.g. struct ip_tunnel), leading to garbage values being read and kernel crashes. Fix this by introducing bond_header_ops with wrapper functions that delegate to the active slave's header_ops using the slave's own device. This ensures netdev_priv() in the slave's header functions always receives the correct device. The fix is placed in the bonding driver rather than individual device drivers, as the root cause is bond blindly inheriting header_ops from the slave without considering that these callbacks expect a specific netdev_priv() layout. The type confusion can be observed by adding a printk in ipgre_header() and running the following commands: ip link add dummy0 type dummy ip addr add 10.0.0.1/24 dev dummy0 ip link set dummy0 up ip link add gre1 type gre local 10.0.0.1 ip link add bond1 type bond mode active-backup ip link set gre1 master bond1 ip link set gre1 up ip link set bond1 up ip addr add fe80::1/64 dev bond1

CVSS 7.8
EPSS 0.04%
Priority 0
CWE CWE-362

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows User Interface Core allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-191

GStreamer H.266 Codec Parser Integer Underflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the parsing of picture partitions. The issue results from the lack of proper validation of user-supplied data, which can result in an integer underflow before writing to memory. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28910.

CVSS 7.8
EPSS 0.04%
Priority 0
CWE CWE-416

Use after free in Windows Universal Plug and Play (UPnP) Device Host allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-787

GStreamer H.266 Codec Parser Out-Of-Bounds Write Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. Interaction with this library is required to exploit this vulnerability but attack vectors may vary depending on the implementation. The specific flaw exists within the processing of APS units. The issue results from the lack of proper validation of user-supplied data, which can result in a write past the end of an allocated buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28911.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-787

AIDA64 Business 5.99.4900 contains a structured exception handling buffer overflow vulnerability that allows local attackers to execute arbitrary code by overwriting SEH pointers with malicious shellcode. Attackers can inject egg hunter shellcode through the SMTP display name field in preferences or report wizard functionality to trigger the overflow and execute code with application privileges.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-502

NVIDIA Megatron-LM contains a vulnerability in the hybrid conversion script where an Attacker may cause an RCE by convincing a user to load a maliciously crafted file. A successful exploit of this vulnerability may lead to code execution, escalation of privileges, information disclosure, and data tampering.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-502

NVIDIA Model Optimizer for Windows and Linux contains a vulnerability in the ONNX quantization feature, where a user could cause unsafe deserialization by providing a specially crafted input file. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, and information disclosure.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-502

NVIDIA Megatron-LM contains a vulnerability in checkpoint loading where an Attacker may cause an RCE by convincing a user to load a maliciously crafted file. A successful exploit of this vulnerability may lead to code execution, escalation of privileges, information disclosure, and data tampering.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-502

NVIDIA Megatron-LM contains a vulnerability in inferencing where an Attacker may cause an RCE by convincing a user to load a maliciously crafted input. A successful exploit of this vulnerability may lead to code execution, escalation of privileges, information disclosure, and data tampering.

CVSS 7.8
EPSS 0.44%
Priority 0
CWE CWE-502

Deserialization of untrusted data in Microsoft High Performance Compute Pack (HPC) allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS
Priority 0
CWE CWE-269

A logic issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7, macOS Sonoma 14.8, macOS Tahoe 26. A malicious app may be able to gain root privileges.

CVSS 7.8
EPSS 0.01%
Priority 0
CWE CWE-22

pydicom is a pure Python package for working with DICOM files. Versions 2.0.0-rc.1 through 3.0.1 are vulnerable to Path Traversal through a maliciously crafted DICOMDIR ReferencedFileID when it is set to a path outside the File-set root. pydicom resolves the path only to confirm that it exists, but does not verify that the resolved path remains under the File-set root. Subsequent public FileSet operations such as copy(), write(), and remove()+write(use_existing=True) use that unchecked path in file I/O operations. This allows arbitrary file read/copy and, in some flows, move/delete outside the File-set root. This issue has been fixed in version 3.0.2.

CVSS 7.8
EPSS 0.02%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RSS context delete logic We need to free the corresponding RSS context VNIC in FW everytime an RSS context is deleted in driver. Commit 667ac333dbb7 added a check to delete the VNIC in FW only when netif_running() is true to help delete RSS contexts with interface down. Having that condition will make the driver leak VNICs in FW whenever close() happens with active RSS contexts. On the subsequent open(), as part of RSS context restoration, we will end up trying to create extra VNICs for which we did not make any reservation. FW can fail this request, thereby making us lose active RSS contexts. Suppose an RSS context is deleted already and we try to process a delete request again, then the HWRM functions will check for validity of the request and they simply return if the resource is already freed. So, even for delete-when-down cases, netif_running() check is not necessary. Remove the netif_running() condition check when deleting an RSS context.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-416

Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally.

CVSS 7.8
EPSS 0.44%
Priority 0
CWE CWE-502

Deserialization of untrusted data in Azure Monitor Agent allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.03%
Priority 0
CWE CWE-787

Substance3D - Sampler versions 6.0.0 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 7.8
EPSS 0.03%
Priority 0
CWE CWE-416

InDesign Desktop versions 21.3, 20.5.3 and earlier are affected by a Use After Free vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

CVSS 7.8
EPSS 0.11%
Priority 0
CWE CWE-280

Kernel software installed and running inside a Host VM may post improper commands to the GPU Firmware to trigger a memory read or write outside the permitted range of memory for the host kernel. Addresses passed to the GPU Firmware can be used by the Firmware for more privileged memory accesses than are permitted by the system.

CVSS 7.8
EPSS 0.03%
Priority 0
CWE CWE-78

electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to version 3.7.9, a code execution (RCE) vulnerability exists in electerm's SFTP open with system editor or "Edit with custom editor" feature. When a user opts to edit a file using open with system editor or open with a custom editor, the filename is passed directly into a command line without sanitization. A malicious actor controlling the SSH server or user OS can exploit this by crafting a filename containing shell metacharacters. If a victim subsequently attempts to edit this file, the injected commands are executed on their machine with the user's privileges. This could allow the attacker to run arbitrary code, install malware, or move laterally within the network. This issue has been patched in version 3.7.9.

CVSS 7.8
EPSS 0.04%
Priority 0
CWE CWE-178

Heimdall is a cloud native Identity Aware Proxy and Access Control Decision service. Prior to version 0.17.14, Heimdall handles URL-encoded slashes (%2F) in a case-sensitive manner, while percent-encoding is defined to be case-insensitive. As a result, the lowercase equivalent (%2f) is not recognized and therefore not processed as expected when allow_encoded_slashes is set to off (the default setting). This discrepancy can lead to differences in how request paths are interpreted by heimdall and upstream components, which may result in authorization bypass. This issue has been patched in version 0.17.14.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-416

Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-415

Double free in Windows Kernel allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-416

Use after free in Microsoft Office PowerPoint allows an unauthorized attacker to execute code locally.

CVSS 7.8
EPSS 0.15%
Priority 0
CWE CWE-843

Access of resource using incompatible type ('type confusion') in Windows OLE allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.06%
Priority 0
CWE CWE-306

Missing authentication for critical function in Windows Remote Desktop Licensing Service allows an authorized attacker to elevate privileges locally.

CVSS 7.8
EPSS 0.01%
Priority 0

In the Linux kernel, the following vulnerability has been resolved: apparmor: Fix double free of ns_name in aa_replace_profiles() if ns_name is NULL after 1071 error = aa_unpack(udata, &lh, &ns_name); and if ent->ns_name contains an ns_name in 1089 } else if (ent->ns_name) { then ns_name is assigned the ent->ns_name 1095 ns_name = ent->ns_name; however ent->ns_name is freed at 1262 aa_load_ent_free(ent); and then again when freeing ns_name at 1270 kfree(ns_name); Fix this by NULLing out ent->ns_name after it is transferred to ns_name ")

CVSS 7.8
EPSS 0.29%
Priority 0
CWE CWE-129

An out-of-bounds heap write exists in the RAR5 recovery-volume (.rev) parser in WinRAR and UnRAR (RecVolumes5::ReadHeader in recvol5.cpp). The RecItems vector is sized only when the first .rev file in a set is processed; subsequent .rev files supply an independent RecNum value that is validated against that file's own TotalCount field but never against the actual size of RecItems. A crafted set of two or more .rev files can therefore write an attacker-controlled 32-bit value (the header's RevCRC field) to RecItems[RecNum] at an attacker-controlled offset up to 65534 * sizeof(RecVolItem) bytes past the allocation, corrupting adjacent heap objects. Triggering requires the victim to run a recovery/test operation on an attacker-supplied .rev set (for example 'unrar t x.part1.rev', WinRAR 'Repair archive', or auto-recovery when extracting a volume set with a missing .rar part). This is the RAR5-path sibling of CVE-2023-40477 (which was fixed in the RAR3 path only in WinRAR 6.23). Fixed in WinRAR / RAR 7.23.

← PreviousPage 215 / 712Next →