CVE Database

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix ld_{abs,ind} failure path analysis in subprogs Usage of ld_{abs,ind} instructions got extended into subprogs some time ago via commit 09b28d76eac4 ("bpf: Add abnormal return checks."). These are only allowed in subprograms when the latter are BTF annotated and have scalar return types. The code generator in bpf_gen_ld_abs() has an abnormal exit path (r0=0 + exit) from legacy cBPF times. While the enforcement is on scalar return types, the verifier must also simulate the path of abnormal exit if the packet data load via ld_{abs,ind} failed. This is currently not the case. Fix it by having the verifier simulate both success and failure paths, and extend it in similar ways as we do for tail calls. The success path (r0=unknown, continue to next insn) is pushed onto stack for later validation and the r0=0 and return to the caller is done on the fall-through side.

In the Linux kernel, the following vulnerability has been resolved: gpib: fix use-after-free in IO ioctl handlers The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor pointer after board->big_gpib_mutex has been released. A concurrent IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during this window, causing a use-after-free. The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly release big_gpib_mutex before calling their handler. wait_ioctl() is called with big_gpib_mutex held, but ibwait() releases it internally when wait_mask is non-zero. In all four cases, the descriptor pointer obtained from handle_to_descriptor() becomes unprotected. Fix this by introducing a kernel-only descriptor_busy reference count in struct gpib_descriptor. Each handler atomically increments descriptor_busy under file_priv->descriptors_mutex before releasing the lock, and decrements it when done. close_dev_ioctl() checks descriptor_busy under the same lock and rejects the close with -EBUSY if the count is non-zero. A reference count rather than a simple flag is necessary because multiple handlers can operate on the same descriptor concurrently (e.g. IBRD and IBWAIT on the same handle from different threads). A separate counter is needed because io_in_progress can be cleared from unprivileged userspace via the IBWAIT ioctl (through general_ibstatus() with set_mask containing CMPL), which would allow an attacker to bypass a check based solely on io_in_progress. The new descriptor_busy counter is only modified by the kernel IO paths. The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex) and the handlers only hold descriptors_mutex briefly during the lookup, so there is no deadlock risk and no impact on IO throughput.

A vulnerability has been found in Ezbsystems UltraISO Premium Edition up to 9.76. Affected by this issue is some unknown functionality in the library bootpt64.sys of the component Kernel Driver. The manipulation leads to improper access controls. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Heap buffer out-of-bounds read vulnerability in Avast Antivirus when scanning a malformed Windows PE file may allow Local Execution of Code or Denial-of-Service of the antivirus process. This issue affects Avast Antivirus, AVG Antivirus, Norton Antivirus, Avast One, and Avast Business Antivirus on Windows, macOS, and Linux for virus definition builds before VPS 25021310. The affected scanning logic is delivered through a shared Gen Digital virus definition update stream. The same stream feeds the consumer antivirus products listed in this advisory and other Gen Digital products that embed the same engine. Mitigation flows through this update channel; installations at or above the listed build are not vulnerable regardless of which product consumes the stream.

Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally.

Improper input validation in Microsoft PowerShell allows an authorized attacker to elevate privileges locally.

GIMP ICO File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of ICO files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28599.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050: Move iio_device_register() to correct location iio_device_register() should be at the end of the probe function to prevent race conditions. Place iio_device_register() at the end of the probe function and place iio_device_unregister() accordingly.

A flaw was found in the X.Org X server's XKB key types request validation. A local attacker could send a specially crafted request to the X server, leading to an out-of-bounds memory access vulnerability. This could result in the disclosure of sensitive information or cause the server to crash, leading to a Denial of Service (DoS). In certain configurations, higher impact outcomes may be possible.

In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: AV1: Fix tile info buffer size Each tile info is composed of: row_sb, col_sb, start_pos and end_pos (4 bytes each). So the total required memory is AV1_MAX_TILES * 16 bytes. Use the correct #define to allocate the buffer and avoid writing tile info in non-allocated memory.

OpenImageIO is a toolset for reading, writing, and manipulating image files of any image file format relevant to VFX / animation. Prior to 3.0.18.0 and 3.1.13.0, softimageinput.cpp:469 (mixed RLE) and :345 (pure RLE) do not clamp the run length to remaining scanline width before writing pixels. The raw packet path (line 403) correctly clamps with std::min, but RLE paths skip this check. A crafted .pic file causes heap overflow up to 65535 bytes. This vulnerability is fixed in 3.0.18.0 and 3.1.13.0.

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior.

Notepad++ is a free and open-source source code editor. From 8.9.4 until 8.9.6, Notepad++ contains a local privilege escalation vulnerability in the installer. During installation, the installer invokes powershell.exe without using an absolute path after setting the working directory to the installation contextMenu directory. If an attacker can pre-place a malicious powershell.exe in a user-writable custom installation directory, and a privileged user later runs the installer and selects that directory, the attacker-controlled executable is launched with the elevated privileges of the installer. This vulnerability is fixed in 8.9.6.

NVIDIA Megatron Bridge for Linux contains a vulnerability where an attacker could cause deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, escalation of privileges, data tampering, and information disclosure.

InDesign Desktop versions 21.3, 20.5.3 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

In the Linux kernel, the following vulnerability has been resolved: xfrm: hold dev ref until after transport_finish NF_HOOK After async crypto completes, xfrm_input_resume() calls dev_put() immediately on re-entry before the skb reaches transport_finish. The skb->dev pointer is then used inside NF_HOOK and its okfn, which can race with device teardown. Remove the dev_put from the async resumption entry and instead drop the reference after the NF_HOOK call in transport_finish, using a saved device pointer since NF_HOOK may consume the skb. This covers NF_DROP, NF_QUEUE and NF_STOLEN paths that skip the okfn. For non-transport exits (decaps, gro, drop) and secondary async return points, release the reference inline when async is set.

In the Linux kernel, the following vulnerability has been resolved: iavf: fix PTP use-after-free during reset Commit 7c01dbfc8a1c5f ("iavf: periodically cache PHC time") introduced a worker to cache PHC time, but failed to stop it during reset or disable. This creates a race condition where `iavf_reset_task()` or `iavf_disable_vf()` free adapter resources (AQ) while the worker is still running. If the worker triggers `iavf_queue_ptp_cmd()` during teardown, it accesses freed memory/locks, leading to a crash. Fix this by calling `iavf_ptp_release()` before tearing down the adapter. This ensures `ptp_clock_unregister()` synchronously cancels the worker and cleans up the chardev before the backing resources are destroyed.

In setGlobalProxy of DevicePolicyManagerService.java, there is a possible desync in persistence due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation.

In nltk/nltk versions 3.9.3 and earlier, five Stanford interface classes (StanfordPOSTagger, StanfordNERTagger, StanfordParser, StanfordDependencyParser, and StanfordNeuralDependencyParser) are vulnerable to untrusted JAR code execution. These classes accept user-controllable JAR paths and execute them via the `java()` function, which invokes `subprocess.Popen()` without integrity verification. This vulnerability is identical to CVE-2026-0848, which was fixed for StanfordSegmenter by adding SHA256 verification. However, the fix was not applied to these additional classes, leaving them susceptible to arbitrary code execution when loading untrusted JAR files.

OpenClaw version 2026.2.19-2 prior to 2026.2.21 contains a command injection vulnerability in systemd unit file generation where attacker-controlled environment values are not validated for CR/LF characters, allowing newline injection to break out of Environment= lines and inject arbitrary systemd directives. An attacker who can influence config.env.vars and trigger service install or restart can execute arbitrary commands with the privileges of the OpenClaw gateway service user.

In the Linux kernel, the following vulnerability has been resolved: usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke() The ChipIdea UDC driver can encounter "not page aligned sg buffer" errors when a USB device is reconnected after being disconnected during an active transfer. This occurs because _ep_nuke() returns requests to the gadget layer without properly unmapping DMA buffers or cleaning up scatter-gather bounce buffers. Root cause: When a disconnect happens during a multi-segment DMA transfer, the request's num_mapped_sgs field and sgt.sgl pointer remain set with stale values. The request is returned to the gadget driver with status -ESHUTDOWN but still has active DMA state. If the gadget driver reuses this request on reconnect without reinitializing it, the stale DMA state causes _hardware_enqueue() to skip DMA mapping (seeing non-zero num_mapped_sgs) and attempt to use freed/invalid DMA addresses, leading to alignment errors and potential memory corruption. The normal completion path via _hardware_dequeue() properly calls usb_gadget_unmap_request_by_dev() and sglist_do_debounce() before returning the request. The _ep_nuke() path must do the same cleanup to ensure requests are returned in a clean, reusable state. Fix: Add DMA unmapping and bounce buffer cleanup to _ep_nuke() to mirror the cleanup sequence in _hardware_dequeue(): - Call usb_gadget_unmap_request_by_dev() if num_mapped_sgs is set - Call sglist_do_debounce() with copy=false if bounce buffer exists This ensures that when requests are returned due to endpoint shutdown, they don't retain stale DMA mappings. The 'false' parameter to sglist_do_debounce() prevents copying data back (appropriate for shutdown path where transfer was aborted).

OpenViking versions 0.2.1 and prior, fixed in commit 46b3e76, contain a path traversal vulnerability in the .ovpack import handling that allows attackers to write files outside the intended import directory. Attackers can craft malicious ZIP archives with traversal sequences, absolute paths, or drive prefixes in member names to overwrite or create arbitrary files with the importing process privileges.

stable-diffusion.cpp is a pure C/C++ library for running diffusion model (Stable Diffusion, Flux, Wan, Qwen Image, Z-Image, and more) inference. In versions prior to master-584-0a7ae07, the pickle .ckpt parser in src/model.cpp contained a heap buffer overflow vulnerability in the GLOBAL opcode handler. The issue was caused by missing validation when searching for newline-delimited fields. A crafted .ckpt file without the expected newline could cause the parser to use -1 as a copy length, resulting in immediate heap corruption. The attack requires the victim or application to load a .ckpt file from an untrusted source, such as a downloaded model from a model sharing site. The issue has been resolved in version master-584-0a7ae07. If developers are unable to immediately update their applications they can work around this issue by following these instructions: do not load .ckpt checkpoint files from untrusted sources, and prefer trusted model sources and safer formats such as .safetensors where possible.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: validate LTK enc_size on load Load Long Term Keys stores the user-provided enc_size and later uses it to size fixed-size stack operations when replying to LE LTK requests. An enc_size larger than the 16-byte key buffer can therefore overflow the reply stack buffer. Reject oversized enc_size values while validating the management LTK record so invalid keys never reach the stored key state.

Concurrent execution using shared resource with improper synchronization ('race condition') in Windows Push Notifications allows an authorized attacker to elevate privileges locally.

In the Linux kernel, the following vulnerability has been resolved: fs: afs: revert mmap_prepare() change Partially reverts commit 9d5403b1036c ("fs: convert most other generic_file_*mmap() users to .mmap_prepare()"). This is because the .mmap invocation establishes a refcount, but .mmap_prepare is called at a point where a merge or an allocation failure might happen after the call, which would leak the refcount increment. Functionality is being added to permit the use of .mmap_prepare in this case, but in the interim, we need to fix this.

Out-of-bounds read in Windows Hyper-V allows an unauthorized attacker to execute code locally.

In the Linux kernel, the following vulnerability has been resolved: ovpn: fix possible use-after-free in ovpn_net_xmit When building the skb_list in ovpn_net_xmit, skb_share_check will free the original skb if it is shared. The current implementation continues to use the stale skb pointer for subsequent operations: - peer lookup, - skb_dst_drop (even though all segments produced by skb_gso_segment will have a dst attached), - ovpn_peer_stats_increment_tx. Fix this by moving the peer lookup and skb_dst_drop before segmentation so that the original skb is still valid when used. Return early if all segments fail skb_share_check and the list ends up empty. Also switch ovpn_peer_stats_increment_tx to use skb_list.next; the next patch fixes the stats logic.

Ubuntu Linux 6.8, 6.17 and 7.0 contain AppArmor SAUCE patches which can potentially incorrectly compute the size of an internal buffer, leading to a heap memory out-of-bounds read in notification handling code. The bug can be triggered by an unprivileged local user and can result in invalid data being processed by the AppArmor DFA policy engine.

In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stale offload->prog pointer after constant blinding When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes JIT compilation with constant blinding enabled (bpf_jit_harden >= 2), bpf_jit_blind_constants() clones the program. The original prog is then freed in bpf_jit_prog_release_other(), which updates aux->prog to point to the surviving clone, but fails to update offload->prog. This leaves offload->prog pointing to the freed original program. When the network namespace is subsequently destroyed, cleanup_net() triggers bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls __bpf_prog_offload_destroy(offload->prog). Accessing the freed prog causes a page fault: BUG: unable to handle page fault for address: ffffc900085f1038 Workqueue: netns cleanup_net RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80 Call Trace: __bpf_offload_dev_netdev_unregister+0x257/0x350 bpf_dev_bound_netdev_unregister+0x4a/0x90 unregister_netdevice_many_notify+0x2a2/0x660 ... cleanup_net+0x21a/0x320 The test sequence that triggers this reliably is: 1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden) 2. Run xdp_metadata selftest, which creates a dev-bound-only XDP program on a veth inside a netns (./test_progs -t xdp_metadata) 3. cleanup_net -> page fault in __bpf_prog_offload_destroy Dev-bound-only programs are unique in that they have an offload structure but go through the normal JIT path instead of bpf_prog_offload_compile(). This means they are subject to constant blinding's prog clone-and-replace, while also having offload->prog that must stay in sync. Fix this by updating offload->prog in bpf_jit_prog_release_other(), alongside the existing aux->prog update. Both are back-pointers to the prog that must be kept in sync when the prog is replaced.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix linked reg delta tracking when src_reg == dst_reg Consider the case of rX += rX where src_reg and dst_reg are pointers to the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first modifies the dst_reg in-place, and later in the delta tracking, the subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the post-{add,sub} value instead of the original source. This is problematic since it sets an incorrect delta, which sync_linked_regs() then propagates to linked registers, thus creating a verifier-vs-runtime mismatch. Fix it by just skipping this corner case.

After Effects versions 26.0, 25.6.4 and earlier are affected by a Heap-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix missing bounds check on DEFAULT table in verify_dfa() The verify_dfa() function only checks DEFAULT_TABLE bounds when the state is not differentially encoded. When the verification loop traverses the differential encoding chain, it reads k = DEFAULT_TABLE[j] and uses k as an array index without validation. A malformed DFA with DEFAULT_TABLE[j] >= state_count, therefore, causes both out-of-bounds reads and writes. [ 57.179855] ================================================================== [ 57.180549] BUG: KASAN: slab-out-of-bounds in verify_dfa+0x59a/0x660 [ 57.180904] Read of size 4 at addr ffff888100eadec4 by task su/993 [ 57.181554] CPU: 1 UID: 0 PID: 993 Comm: su Not tainted 6.19.0-rc7-next-20260127 #1 PREEMPT(lazy) [ 57.181558] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 57.181563] Call Trace: [ 57.181572] <TASK> [ 57.181577] dump_stack_lvl+0x5e/0x80 [ 57.181596] print_report+0xc8/0x270 [ 57.181605] ? verify_dfa+0x59a/0x660 [ 57.181608] kasan_report+0x118/0x150 [ 57.181620] ? verify_dfa+0x59a/0x660 [ 57.181623] verify_dfa+0x59a/0x660 [ 57.181627] aa_dfa_unpack+0x1610/0x1740 [ 57.181629] ? __kmalloc_cache_noprof+0x1d0/0x470 [ 57.181640] unpack_pdb+0x86d/0x46b0 [ 57.181647] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181653] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181656] ? aa_unpack_nameX+0x1a8/0x300 [ 57.181659] aa_unpack+0x20b0/0x4c30 [ 57.181662] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181664] ? stack_depot_save_flags+0x33/0x700 [ 57.181681] ? kasan_save_track+0x4f/0x80 [ 57.181683] ? kasan_save_track+0x3e/0x80 [ 57.181686] ? __kasan_kmalloc+0x93/0xb0 [ 57.181688] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181693] ? aa_simple_write_to_buffer+0x54/0x130 [ 57.181697] ? policy_update+0x154/0x330 [ 57.181704] aa_replace_profiles+0x15a/0x1dd0 [ 57.181707] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181710] ? __kvmalloc_node_noprof+0x44a/0x780 [ 57.181712] ? aa_loaddata_alloc+0x77/0x140 [ 57.181715] ? srso_alias_return_thunk+0x5/0xfbef5 [ 57.181717] ? _copy_from_user+0x2a/0x70 [ 57.181730] policy_update+0x17a/0x330 [ 57.181733] profile_replace+0x153/0x1a0 [ 57.181735] ? rw_verify_area+0x93/0x2d0 [ 57.181740] vfs_write+0x235/0xab0 [ 57.181745] ksys_write+0xb0/0x170 [ 57.181748] do_syscall_64+0x8e/0x660 [ 57.181762] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 57.181765] RIP: 0033:0x7f6192792eb2 Remove the MATCH_FLAG_DIFF_ENCODE condition to validate all DEFAULT_TABLE entries unconditionally.

A logic issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7, macOS Sonoma 14.8, macOS Tahoe 26. A malicious app may be able to gain root privileges.

BentoML is a Python library for building online serving systems optimized for AI apps and model inference. Prior to 1.4.36, the safe_extract_tarfile() function validates that each tar member's path is within the destination directory, but for symlink members it only validates the symlink's own path, not the symlink's target. An attacker can create a malicious bento/model tar file containing a symlink pointing outside the extraction directory, followed by a regular file that writes through the symlink, achieving arbitrary file write on the host filesystem. This vulnerability is fixed in 1.4.36.

Microsoft UFO open-source framework for intelligent automation across devices and platforms. Microsoft UFO tagged releases up to and including v3.0.0 contain an OS command injection vulnerability in the shell action replay path. In affected releases, ShellReceiver.run_shell() passes a command string from action parameters directly to subprocess.Popen() with shell=True and executable=powershell.exe. The same shell-execution behavior is also reachable through ShellReceiver.execute_command(). The shell receiver is invoked by action classes such as RunShellCommand.execute() and ExecuteCommand.execute(), which forward stored action parameters to the shell receiver. Because UFO stores planned and executed actions in per-session JSON records, an attacker who can write or modify a session/action JSON file can plant a shell action. When the session is resumed or replayed, UFO executes the attacker's command as the UFO process user.

pyp2spec generates working Fedora RPM spec file for Python projects. Prior to version 0.14.1, pyp2spec was writing PyPI package metadata (e.g. the summary field) into the generated spec file without escaping RPM macro directives. When a packager then runs rpmbuild, those directives get evaluated, so a malicious package can execute arbitrary commands on the build machine. This issue has been patched in version 0.14.1.

Use after free in Microsoft Office PowerPoint allows an unauthorized attacker to execute code locally.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In CompositeDeepScanLine::readPixels, per-pixel totals are accumulated in vector<unsigned int> total_sizes for attacker-controlled large counts across many parts, total_sizes[ptr] wraps modulo 2^32. overall_sample_count is then derived from wrapped totals and used in samples[channel].resize(overall_sample_count). Decode pointer setup/consumption proceeds with true sample counts, and write operations in core unpack (generic_unpack_deep_pointers) overrun the undersized composite sample buffer. This vulnerability is fixed in v3.2.6, v3.3.8, and v3.4.6.

Use after free in Microsoft Office Excel allows an unauthorized attacker to execute code locally.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Fix RSS context delete logic We need to free the corresponding RSS context VNIC in FW everytime an RSS context is deleted in driver. Commit 667ac333dbb7 added a check to delete the VNIC in FW only when netif_running() is true to help delete RSS contexts with interface down. Having that condition will make the driver leak VNICs in FW whenever close() happens with active RSS contexts. On the subsequent open(), as part of RSS context restoration, we will end up trying to create extra VNICs for which we did not make any reservation. FW can fail this request, thereby making us lose active RSS contexts. Suppose an RSS context is deleted already and we try to process a delete request again, then the HWRM functions will check for validity of the request and they simply return if the resource is already freed. So, even for delete-when-down cases, netif_running() check is not necessary. Remove the netif_running() condition check when deleting an RSS context.

NVIDIA NVTabular contains a vulnerability where an attacker could cause improper deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering and information disclosure.

Use after free in Windows DWM Core Library allows an authorized attacker to elevate privileges locally.

NVIDIA Transformers4Rec for Linux contains a vulnerability where an attacker could cause improper deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, data tampering, and information disclosure.

GitPython is a python library used to interact with Git repositories. Prior to version 3.1.49, GitConfigParser.set_value() passes values to Python's configparser without validating for newlines. GitPython's own _write() converts embedded newlines into indented continuation lines (e.g. \n becomes \n\t), but Git still accepts an indented [core] stanza as a section header — so the injected core.hooksPath becomes effective configuration. Any Git operation that invokes hooks (commit, merge, checkout) will then execute scripts from the attacker-controlled path. This issue has been patched in version 3.1.49.

A cross-site scripting vulnerability in the Builder Component of Pilz PASvisu before 1.14.1 allows a local unauthenticated attacker to inject malicious javascript and gain full control over the device.

Sante DICOM Viewer Pro DCM File Parsing Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Sante DICOM Viewer Pro. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the parsing of DCM files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-28129.

DNG SDK versions 1.7.1 2471 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.

Substance3D - Stager versions 3.1.7 and earlier are affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file.