CVE Database

Inclusion of Functionality from Untrusted Control Sphere vulnerability in WP Royal Royal Elementor Addons royal-elementor-addons allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects Royal Elementor Addons: from n/a through <= 1.7.1049.

tmp is a temporary file and directory creator for node.js. Prior to 0.2.6, the tmp npm package contains a path traversal vulnerability that allows escaping the intended temporary directory when untrusted data flows into the prefix, postfix, or dir options. By embedding traversal sequences (e.g., ../) or path separators in these parameters, attackers can cause files to be created outside the configured temporary base directory at attacker-controlled locations with the privileges of the running process. This vulnerability affects applications that pass user-controlled data to tmp's file/directory creation functions without proper input sanitization. This vulnerability is fixed in 0.2.6.

A vulnerability in @fastify/middie versions < 9.2.0 can result in authentication/authorization bypass when using path-scoped middleware (for example, app.use('/secret', auth)). When Fastify router normalization options are enabled (such as ignoreDuplicateSlashes, useSemicolonDelimiter, and related trailing-slash behavior), crafted request paths may bypass middleware checks while still being routed to protected handlers.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix DMA FIFO desync on error CQE SQ recovery In case of a TX error CQE, a recovery flow is triggered, mlx5e_reset_txqsq_cc_pc() resets dma_fifo_cc to 0 but not dma_fifo_pc, desyncing the DMA FIFO producer and consumer. After recovery, the producer pushes new DMA entries at the old dma_fifo_pc, while the consumer reads from position 0. This causes us to unmap stale DMA addresses from before the recovery. The DMA FIFO is a purely software construct with no HW counterpart. At the point of reset, all WQEs have been flushed so dma_fifo_cc is already equal to dma_fifo_pc. There is no need to reset either counter, similar to how skb_fifo pc/cc are untouched. Remove the 'dma_fifo_cc = 0' reset. This fixes the following WARNING: WARNING: CPU: 0 PID: 0 at drivers/iommu/dma-iommu.c:1240 iommu_dma_unmap_page+0x79/0x90 Modules linked in: mlx5_vdpa vringh vdpa bonding mlx5_ib mlx5_vfio_pci ipip mlx5_fwctl tunnel4 mlx5_core ib_ipoib geneve ip6_gre ip_gre gre nf_tables ip6_tunnel rdma_ucm ib_uverbs ib_umad vfio_pci vfio_pci_core act_mirred act_skbedit act_vlan vhost_net vhost tap ip6table_mangle ip6table_nat ip6table_filter ip6_tables iptable_mangle cls_matchall nfnetlink_cttimeout act_gact cls_flower sch_ingress vhost_iotlb iptable_raw tunnel6 vfio_iommu_type1 vfio openvswitch nsh rpcsec_gss_krb5 auth_rpcgss oid_registry xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter overlay zram zsmalloc rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core fuse [last unloaded: nf_tables] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.13.0-rc5_for_upstream_min_debug_2024_12_30_21_33 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommu_dma_unmap_page+0x79/0x90 Code: 2b 4d 3b 21 72 26 4d 3b 61 08 73 20 49 89 d8 44 89 f9 5b 4c 89 f2 4c 89 e6 48 89 ef 5d 41 5c 41 5d 41 5e 41 5f e9 c7 ae 9e ff <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 2e 0f 1f 84 00 00 00 00 Call Trace: <IRQ> ? __warn+0x7d/0x110 ? iommu_dma_unmap_page+0x79/0x90 ? report_bug+0x16d/0x180 ? handle_bug+0x4f/0x90 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? iommu_dma_unmap_page+0x79/0x90 ? iommu_dma_unmap_page+0x2e/0x90 dma_unmap_page_attrs+0x10d/0x1b0 mlx5e_tx_wi_dma_unmap+0xbe/0x120 [mlx5_core] mlx5e_poll_tx_cq+0x16d/0x690 [mlx5_core] mlx5e_napi_poll+0x8b/0xac0 [mlx5_core] __napi_poll+0x24/0x190 net_rx_action+0x32a/0x3b0 ? mlx5_eq_comp_int+0x7e/0x270 [mlx5_core] ? notifier_call_chain+0x35/0xa0 handle_softirqs+0xc9/0x270 irq_exit_rcu+0x71/0xd0 common_interrupt+0x7f/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40

Joomla NextGen Editor 2.1.0 contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL commands through the plname parameter. Attackers can send GET requests to index.php with option=com_nge&view=config and inject malicious SQL code in the plname parameter to extract sensitive database information.

Joomla! Component jCart for OpenCart 2.0 contains an SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the product_id parameter. Attackers can send GET requests to index.php with the option=com_jcart&route=product/product parameters and malicious product_id values to extract sensitive database information.

GeoServer is an open source server that allows users to share and edit geospatial data. Prior to versions 2.26.4 and 2.27.3, a GeoServer that uses `ENTITY_RESOLUTION_ALLOWLIST` may allow attacker to perform unauthenticated Server-Side Request Forgery (SSRF). This vulnerability requires that GeoServer is set up to use a proxy base URL and the `ENTITY_RESOLUTION_ALLOWLIST` (default since 2.25.0). Versions 2.26.4 and 2.27.3 contain a fix. GeoServer installations are only affected by this vulnerability if they use a proxy base URL that does not contain a URL path or end with a slash. If the proxy base URL does not contain a path, adding a slash to the end of the URL will mitigate this vulnerability.

The WooCommerce PayPal Payments plugin for WordPress is vulnerable to unauthorized order manipulation and information disclosure due to missing authorization checks on the `ppc-create-order` and `ppc-get-order` WC-AJAX endpoints in all versions up to, and including, 4.0.1. The `ppc-create-order` endpoint accepts an arbitrary WooCommerce order ID in the `pay-now` context without validating order ownership, allowing attackers to create PayPal orders for any WC order and write PayPal metadata to it. The `ppc-get-order` endpoint returns full PayPal order details for any PayPal order ID without binding to the requester's session. This makes it possible for unauthenticated attackers to chain these endpoints to manipulate other customers' order payment flows and exfiltrate sensitive order details (payer information, shipping data) by creating a PayPal order for a victim's WC order and then retrieving the PayPal order data.

The Aqara Developer Portal (developer.aqara.com) and shared test environments (developer-test.aqara.com, aiot-test.aqara.com) exhibit cross-origin request sharing, which is an instance of "CWE-942: Permissive Cross-domain Policy with Untrusted Domains," and has an estimated CVSS of CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:H/I:L/A:N (8.2 High).

FlatPress contains a stored cross-site scripting vulnerability in comment and contact forms where name, URL, and email fields are rendered without proper output encoding in Smarty templates. Attackers can inject arbitrary HTML and JavaScript through these fields to execute malicious scripts in browsers of viewers including administrators, or bypass URL scheme validation to inject javascript: or data: URIs.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix buffer overread in rxgk_do_verify_authenticator() Fix rxgk_do_verify_authenticator() to check the buffer size before checking the nonce.

Cryptographic Issue while processing a specific partition which allows unauthorized write access to load a customized bootloader.

PIA's OIDC issuer allowlist for Jenkins tokens uses a bare string-prefix check (issuer.startswith(' https://ci.eclipse.org ') in is_issuer_known, pia/models.py:139) instead of validating the issuer as a properly host-bounded URL. An attacker can craft an issuer such as https://[email protected] (userinfo trick) or https://ci.eclipse.org.evil.host (suffix trick) that satisfies the prefix check while pointing the OIDC discovery and JWKS fetches at a server the attacker controls. An unauthenticated caller of POST /v1/upload/sbom can use this to force PIA to make outbound HTTP(S) requests to an arbitrary attacker-chosen host, and to have oidc.verify_token accept a JWT signed with the attacker's own key.

Vim is an open source, command line text editor. Prior to version 9.2.0565, the update_snapshot() function in src/terminal.c copies the visible terminal screen into the scrollback buffer when a snapshot is taken. For each screen cell it walks the cell's chars[] array with no upper bound, stopping only when it encounters a NUL terminator. When a cell legitimately fills all VTERM_MAX_CHARS_PER_CELL (6) slots — a base character plus five combining marks — the bundled libvterm returns the array without a terminating NUL, so the loop reads past the fixed six-element array and appends the out-of-bounds values to a buffer reserved for only six characters. A program whose output is rendered inside a :terminal window can trigger this with a short byte sequence and no Vim scripting, leading to a crash. This issue has been patched in version 9.2.0565.

Cross-Site Scripting vulnerability in Hitachi Infrastructure Analytics Advisor (Analytics probe component), Hitachi Ops Center Analyzer.This issue affects Hitachi Infrastructure Analytics Advisor:; Hitachi Ops Center Analyzer: from 10.0.0-00 before 11.0.5-00.

Jaxp13XPathTemplate evaluated XPath expressions for StreamSource and SAXSource inputs using a code path that parsed attacker-controlled XML with the JDK's default DocumentBuilderFactory behavior instead of Spring's hardened parser configuration. Applications that evaluate XPath against untrusted XML payloads could therefore be exposed to XML External Entity (XXE) style attacks. Affected versions: Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8.

ReleaseJob#unpack builds job_dir = File.join(@release_dir, 'jobs', name) and job_tgz = File.join(@release_dir, 'jobs', "#{name}.tgz") where name returns @job_meta['name'], a value taken verbatim from the jobs: array of the attacker-supplied release.MF inside the uploaded tarball. These paths are then interpolated into a shell string: Bosh::Common::Exec.sh("tar -C #{job_dir} -xf #{job_tgz} 2>&1", :on_error => :return). Bosh::Common::Exec.sh executes via %x{#{command}} (bosh-common/lib/bosh/common/exec.rb:53), i.e. /bin/sh -c, so any shell metacharacters in name are interpreted. FileUtils.mkdir_p(job_dir) on line 49 creates the literal directory (no shell) and succeeds even when the name contains $()/;, so execution reaches the sh call. Affected versions: - BOSH Director: all versions prior to v282.1.12 (inclusive); fixed in v282.1.12 or later

i18next-http-middleware is a middleware to be used with Node.js web frameworks like express or Fastify and also for Deno. Prior to version 3.9.3, i18next-http-middleware passes the user-controlled lng and ns values from getResourcesHandler directly into i18next.services.backendConnector.load(languages, namespaces, …) without any sanitization. Depending on which backend is configured, the unvalidated path segments enable either path traversal or SSRF. This issue has been patched in version 3.9.3.

Arcane is an interface for managing Docker containers, images, networks, and volumes. Prior to 1.19.0, the unauthenticated GET /api/app-images/logo endpoint reflects a user-supplied color query parameter into the body of an SVG document via strings.ReplaceAll with no escaping. The substitution lands inside a <style> element of the embedded logo.svg, allowing an attacker to close the style block and inject executable <script> content. Because the response is served as image/svg+xml and Arcane sets no Content-Security-Policy or X-Content-Type-Options headers, navigating a logged-in admin victim to a crafted URL executes attacker-controlled JavaScript in Arcane's origin and rides the victim's HttpOnly JWT cookie to fully compromise the admin account. This vulnerability is fixed in 1.19.0.

Yot CMS 3.3.1 contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the aid and cid parameters. Attackers can send GET requests to index.php with crafted SQL payloads in the aid or cid parameters to extract database information including table and column names.

A NestJS application using @nestjs/platform-fastify can allow bypass of authentication/authorization middleware when Fastify path-normalization options are enabled. This issue affects nest.Js: 11.1.13.

Axios is a promise based HTTP client for the browser and Node.js. Prior to 0.32.0 and 1.16.0, axios exposes two read-side prototype-pollution gadgets. When Object.prototype is polluted by an upstream dependency in the same process (e.g. lodash _.merge / CVE-2018-16487), axios silently picks up the polluted values. (1) lib/utils.js line 406 builds merge()'s accumulator as result = {}, so result[targetKey] (line 414) walks Object.prototype and the polluted bucket's own keys are copied into the merged headers and ride out on the wire. (2) lib/core/mergeConfig.js line 26 builds the hasOwnProperty descriptor as a plain-object literal. Object.defineProperty reads descriptor.get/descriptor.set via the prototype chain, so a polluted Object.prototype.get or Object.prototype.set makes the call throw TypeError synchronously on every axios request. This vulnerability is fixed in 0.32.0 and 1.16.0.

The Fluent Forms plugin for WordPress is vulnerable to Authorization Bypass Through User-Controlled Key in all versions up to, and including, 6.1.21. This is due to the SubmissionPolicy class authorizing submission-level actions (read, modify, delete, add notes) based on a user-supplied `form_id` query parameter. This makes it possible for authenticated attackers, with Fluent Forms Manager access restricted to specific forms, to read, modify status, add notes to, and permanently delete form submissions belonging to any other form by spoofing the form_id parameter to a form they are authorized for.

Wss4jSecurityInterceptor initialized its BSP (WS-I Basic Security Profile) compliance flag so that inbound validation disabled WSS4J BSP enforcement on RequestData. Services that validate WS-Security on the network could therefore accept messages that violate BSP rules, weakening protocol-level checks. Affected versions: Spring Web Services 5.0.0 through 5.0.1; 4.1.0 through 4.1.3; 4.0.0 through 4.0.18; 3.1.0 through 3.1.8.

In the Linux kernel, the following vulnerability has been resolved: netfilter: x_tables: guard option walkers against 1-byte tail reads When the last byte of options is a non-single-byte option kind, walkers that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end of the option area. Add an explicit i == optlen - 1 check before dereferencing op[i + 1] in xt_tcpudp and xt_dccp option walkers.

free5GC is an open-source implementation of the 5G core network. Prior to 4.2.2, PCF Npcf_SMPolicyControl missing authentication middleware allows unauthenticated access to SM policy handlers and disclosure of subscriber SUPI. In NewServer(), the smPolicyGroup route group is created and routes are applied without attaching the router authorization middleware. In contrast, other PCF service groups such as Npcf_PolicyAuthorization do attach RouterAuthorizationCheck before route registration. Because the middleware is missing, requests to the /npcf-smpolicycontrol/v1/sm-policies, /npcf-smpolicycontrol/v1/sm-policies/{smPolicyId}, /npcf-smpolicycontrol/v1/sm-policies/{smPolicyId}/update, and /npcf-smpolicycontrol/v1/sm-policies/{smPolicyId}/delete endpoints can reach business logic even when no valid OAuth token is provided. This vulnerability is fixed in 4.2.2.

Joomla StreetGuessr Game 1.1.8 contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the catid parameter. Attackers can send GET requests to index.php with the option=com_streetguess&view=maps parameters and inject SQL code in the catid parameter to extract sensitive database information including version and database names.

Vim is an open source, command line text editor. Prior to version 9.2.0276, a modeline sandbox bypass in Vim allows arbitrary OS command execution when a user opens a crafted file. The `complete`, `guitabtooltip` and `printheader` options are missing the `P_MLE` flag, allowing a modeline to be executed. Additionally, the `mapset()` function lacks a `check_secure()` call, allowing it to be abused from sandboxed expressions. Commit 9.2.0276 fixes the issue.

PackagePersister.validate_tgz builds "tar -tf #{tgz} 2>&1" where tgz = File.join(release_dir, 'packages', "#{name}.tgz") and name = package_meta['name'] comes directly from release.MF inside the uploaded tarball. The string is passed to Bosh::Common::Exec.sh, which executes via %x{} — i.e., /bin/sh -c. No Shellwords.escape is applied. The Models::Package Sequel validation (VALID_ID = /^[-0-9A-Za-z_+.]+$/i) would reject the name, but in create_package (lines 74–79) the shell-out in save_package_source_blob runs before package.save, so validation fires too late. Affected versions: - BOSH: all versions prior to v282.1.12 (inclusive); fixed in v282.1.12 or later

code100x contains an authentication bypass vulnerability in the Mobile API that allows unauthenticated attackers to impersonate arbitrary users by supplying a crafted JSON payload in the 'g' HTTP header. The middleware in middleware.ts skips identity header generation when an Auth-Key header is present without validating its value, allowing attackers to inject a spoofed user identity header that the downstream route handler in the mobile courses endpoint accepts as trusted, granting unauthorized access to course data belonging to any enrolled user or administrator.

eDirectory contains multiple SQL injection vulnerabilities that allow unauthenticated attackers to bypass administrator authentication and disclose sensitive files by injecting SQL code into parameters. Attackers can exploit the key parameter in the login endpoint with union-based SQL injection to authenticate as administrator, then leverage authenticated file disclosure vulnerabilities in language_file.php to read arbitrary PHP files from the server.

The Open ISES Project 3.30A contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the 'id' parameter. Attackers can send GET requests to the ajax/form_post.php endpoint with crafted SQL payloads to extract sensitive database information including schema names and other data.

HKUDS OpenHarness prior to PR #147 remediation contains an insecure default configuration vulnerability where remote channels inherit allow_from = ["*"] permitting arbitrary remote senders to pass admission checks. Attackers who can reach the configured channel can bypass access controls and reach host-backed agent runtimes, potentially leading to unauthorized file disclosure and read access through default-enabled read-only tools.

Advance Gift Shop Pro Script 2.0.3 contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the search parameter. Attackers can submit crafted SQL payloads in the 's' parameter of search requests to extract sensitive database information including version details and other data.

Balbooa Joomla Forms Builder 2.0.6 contains an unauthenticated SQL injection vulnerability in the form submission handler that allows remote attackers to execute arbitrary SQL queries. Attackers can send POST requests to the com_baforms component with malicious JSON payloads in the 'id' field parameter to extract sensitive database information.

PHP EI-Tube Script 3 contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the search parameter. Attackers can send GET requests to the search endpoint with crafted SQL payloads in the query parameter to extract sensitive database information including usernames, passwords, and version details.

OAuth2 Proxy is a reverse proxy that provides authentication using OAuth2 providers. Versions 7.5.0 through 7.15.1 have a configuration-dependent authentication bypass. Deployments are affected when all of the following are true: Use of `skip_auth_routes` or the legacy `skip_auth_regex`; use of patterns that can be widened by attacker-controlled suffixes, such as `^/foo/.*/bar$` causing potential exposure of `/foo/secret`; and protected upstream applications that interpret `#` as a fragment delimiter or otherwise route the request to the protected base path. In deployments that rely on these settings, an unauthenticated attacker can send a crafted request containing a number sign in the path, including the browser-safe encoded form `%23`, so that OAuth2 Proxy matches a public allowlist rule while the backend serves a protected resource. Deployments that do not use these skip-auth options, or that only allow exact public paths with tightly scoped method and path rules, are not affected. A fix has been implemented in version 7.15.2 to normalize request paths more conservatively before skip-auth matching so fragment content does not influence allowlist decisions. Users who cannot upgrade immediately can reduce exposure by tightening or removing `skip_auth_routes` and `skip_auth_regex` rules, especially patterns that use broad wildcards across path segments. Recommended mitigations include replacing broad rules with exact, anchored public paths and explicit HTTP methods; rejecting requests whose path contains `%23` or `#` at the ingress, load balancer, or WAF level; and/or avoiding placing sensitive application paths behind broad `skip_auth_routes` rules.

phpMyFAQ before 4.1.3 contains an unauthenticated password reset vulnerability in the user password update API endpoint that allows attackers to change account passwords without token validation. Attackers can enumerate valid username and email pairs and force immediate password changes by sending PUT requests to the /api/index.php/user/password/update endpoint, causing account disruption and invalidating legitimate user credentials.

Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint Mint allows attacker-controlled HTTP/2 servers to exhaust memory in a Mint client via PUSH_PROMISE flooding. In lib/mint/http2.ex, Mint.HTTP2.decode_push_promise_headers_and_add_response/5 inserts a :reserved_remote entry into conn.streams for every promised stream ID. The neighbouring Mint.HTTP2.assert_valid_promised_stream_id/2 only verifies that the promised ID is even and not already present; client_settings.max_concurrent_streams is not consulted at promise time. The concurrency cap is only checked when the response HEADERS for the promised stream arrive, so a server that emits PUSH_PROMISE frames and withholds the matching HEADERS never trips that check. HTTP/2 server push is accepted by default (client_settings.enable_push defaults to true). A single long-lived HTTP/2 connection to a hostile server lets that server pin one conn.streams entry per PUSH_PROMISE frame it sends, with no upper bound, until the client process runs out of memory. This issue affects mint: from 0.2.0 before 1.9.0.

Joomla com_hdwplayer 4.2 contains an SQL injection vulnerability in the search.php file that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the hdwplayersearch parameter. Attackers can submit POST requests with crafted SQL payloads in the hdwplayersearch parameter to extract sensitive database information from the hdwplayer_videos table.

Overview: A vulnerability has been found in FAST/TOOLS and CI Server. The web server may return a response containing the CI Server setting information. This information could be exploited by an attacker for other attacks. The affected products and versions are as follows: FAST/TOOLS (Packages: RVSVRN, UNSVRN, HMIWEB, FTEES, HMIMOB) R9.01 to R10.04 CI Server (All packages) R1.01 to R1.04

Kados R10 GreenBee contains an SQL injection vulnerability that allows unauthenticated attackers to execute arbitrary SQL queries by injecting malicious code through the feature_id parameter of boards_buttons/update_feature.php. The feature_id value is concatenated directly into SQL statements without sanitization, allowing attackers to send a crafted GET request with a UNION-based payload to extract sensitive database information including the current user, database name, and DBMS version.

Inout Article Base CMS contains SQL injection vulnerabilities that allow unauthenticated attackers to manipulate database queries through the 'p' and 'u' parameters. Attackers can inject SQL code using XOR-based payloads in GET requests to portalLogin.php to extract sensitive database information or cause denial of service through time-based attacks.

Zechat 1.5 contains a SQL injection vulnerability in the hashtag parameter that allows unauthenticated attackers to extract database information using union-based techniques. Attackers can exploit the hashtag parameter with union-based payloads to retrieve table and column names.

XATABoost CMS 1.0.0 contains a union-based SQL injection vulnerability that allows unauthenticated attackers to manipulate database queries by injecting SQL code through the id parameter. Attackers can send GET requests to news.php with malicious id values to extract sensitive database information.

Capgo before 12.128.2 contains a rate limit bypass vulnerability in the channel_self endpoint that allows attackers to circumvent rate limiting by rotating the user-controlled device_id parameter. Attackers can send multiple requests per second by changing device_id values to flood the channel_devices table and cause database exhaustion.

A buffer underflow vulnerability has been identified in the ogg123 utility from the vorbis-tools 1.4.3 package in function remotethread in remote.c. This vulnerability occurs in the remote control functionality when processing malformed input, leading to a stack buffer underflow that can cause application crashes and potentially allow code execution.

OpenBiz Cubi Lite 3.0.8 contains a SQL injection vulnerability in the login form that allows unauthenticated attackers to manipulate database queries through the username parameter. Attackers can submit POST requests to /bin/controller.php with malicious SQL code in the username field to extract sensitive database information or bypass authentication.

Mastodon is a free, open-source social network server based on ActivityPub. FASP registration requires manual approval by an administrator. In versions 4.4.0 through 4.4.13 and 4.5.0 through 4.5.6, actions performed by a FASP to subscribe to account/content lifecycle events or to backfill content did not check properly whether the FASP was actually approved. This only affects Mastodon servers that have opted in to testing the experimental FASP feature by setting the environment variable `EXPERIMENTAL_FEATURES` to a value including `fasp`. An attacker can make subscriptions and request content backfill without approval by an administrator. Done once, this leads to minor information leak of URIs that are publicly available anyway. But done several times this is a serious vector for DOS, putting pressure on the sidekiq worker responsible for the `fasp` queue. The fix is included in the 4.4.14 and 4.5.7 releases. Admins that are actively testing the experimental "fasp" feature should update their systems. Servers not using the experimental feature flag `fasp` are not affected.

Twitter-Clone 1 contains a SQL injection vulnerability in follow.php that allows attackers to manipulate database queries by injecting SQL code through the userid parameter. Attackers can submit union-based or time-based blind SQL injection payloads to extract sensitive database information including usernames, passwords, and database credentials.