WindriverCVEs & Vulnerabilities

An issue was discovered in Wind River VxWorks 7 22.09 and 23.03. If a VxWorks task or POSIX thread that uses OpenSSL exits, limited per-task memory is not freed, resulting in a memory leak.

An issue was discovered in Wind River VxWorks 6.9 and 7. The function ``tarExtract`` implements TAR file extraction and thereby also processes files within an archive that have relative or absolute file paths. A developer using the "tarExtract" function may expect that the function will strip leading slashes from absolute paths or stop processing when encountering relative paths that are outside of the extraction path, unless otherwise forced. This could lead to unexpected and undocumented behavior, which in general could result in a directory traversal, and associated unexpected behavior.

An issue was discovered in Wind River VxWorks 6.9 and 7, that allows a specifically crafted packet sent by a Radius server, may cause Denial of Service during the IP Radius access procedure.

In Wind River VxWorks 6.9 and 7, a specific crafted packet may lead to an out-of-bounds read during an IKE initial exchange scenario.

An issue was discovered in VxWorks 6.9 through 7. In the IKE component, a specifically crafted packet may lead to reading beyond the end of a buffer, or a double free.

An issue was discovered in Wind River VxWorks 7. The memory allocator has a possible integer overflow in calculating a memory block's size to be allocated by calloc(). As a result, the actual memory allocated is smaller than the buffer size specified by the arguments, leading to memory corruption.

An issue was discovered in Wind River VxWorks through 6.8. There is a possible stack overflow in dhcp server.

An issue was discovered in Wind River VxWorks before 6.5. There is a possible heap overflow in dhcp client.

An issue was discovered in Wind River VxWorks 7 before 21.03. A specially crafted packet may lead to buffer over-read on IKE.

The X509_V_FLAG_X509_STRICT flag enables additional security checks of the certificates present in a certificate chain. It is not set by default. Starting from OpenSSL version 1.1.1h a check to disallow certificates in the chain that have explicitly encoded elliptic curve parameters was added as an additional strict check. An error in the implementation of this check meant that the result of a previous check to confirm that certificates in the chain are valid CA certificates was overwritten. This effectively bypasses the check that non-CA certificates must not be able to issue other certificates. If a "purpose" has been configured then there is a subsequent opportunity for checks that the certificate is a valid CA. All of the named "purpose" values implemented in libcrypto perform this check. Therefore, where a purpose is set the certificate chain will still be rejected even when the strict flag has been used. A purpose is set by default in libssl client and server certificate verification routines, but it can be overridden or removed by an application. In order to be affected, an application must explicitly set the X509_V_FLAG_X509_STRICT verification flag and either not set a purpose for the certificate verification or, in the case of TLS client or server applications, override the default purpose. OpenSSL versions 1.1.1h and newer are affected by this issue. Users of these versions should upgrade to OpenSSL 1.1.1k. OpenSSL 1.0.2 is not impacted by this issue. Fixed in OpenSSL 1.1.1k (Affected 1.1.1h-1.1.1j).

A DNS client stack-based buffer overflow in ipdnsc_decode_name() affects Wind River VxWorks 6.5 through 7. NOTE: This vulnerability only affects products that are no longer supported by the maintainer

In Wind River VxWorks, memory allocator has a possible overflow in calculating the memory block's size to be allocated by calloc(). As a result, the actual memory allocated is smaller than the buffer size specified by the arguments, leading to memory corruption.

httpRpmFs in WebCLI in Wind River VxWorks 5.5 through 7 SR0640 has no check for an escape from the web root.

IRC5 exposes an ftp server (port 21). Upon attempting to gain access you are challenged with a request of username and password, however you can input whatever you like. As long as the field isn't empty it will be accepted.

The IGMP component in VxWorks 6.8.3 IPNET CVE patches created in 2019 has a NULL Pointer Dereference.

Wind River VxWorks 6.6, 6.7, 6.8, 6.9 and 7 has Incorrect Access Control in the RARP client component. IPNET security vulnerability: Handling of unsolicited Reverse ARP replies (Logical Flaw).

Wind River VxWorks 6.7 though 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 3 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion during connect() to a remote host.

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the TCP component (issue 2 of 4). This is an IPNET security vulnerability: TCP Urgent Pointer state confusion caused by a malformed TCP AO option.

Wind River VxWorks 6.6 through vx7 has Session Fixation in the TCP component. This is a IPNET security vulnerability: DoS of TCP connection via malformed TCP options.

Wind River VxWorks has a Buffer Overflow in the TCP component (issue 1 of 4). This is a IPNET security vulnerability: TCP Urgent Pointer = 0 that leads to an integer underflow.

Wind River VxWorks 6.5, 6.6, 6.7, 6.8, 6.9.3 and 6.9.4 has a Memory Leak in the IGMPv3 client component. There is an IPNET security vulnerability: IGMP Information leak via IGMPv3 specific membership report.

Wind River VxWorks 6.9.4 and vx7 has a Buffer Overflow in the TCP component (issue 4 of 4). There is an IPNET security vulnerability: TCP Urgent Pointer state confusion due to race condition.

Wind River VxWorks 6.6, 6.7, 6.8, 6.9 and vx7 has an array index error in the IGMPv3 client component. There is an IPNET security vulnerability: DoS via NULL dereference in IGMP parsing.

Wind River VxWorks 6.6 through 6.9 has a Buffer Overflow in the DHCP client component. There is an IPNET security vulnerability: Heap overflow in DHCP Offer/ACK parsing inside ipdhcpc.

Wind River VxWorks 6.9 and vx7 has a Buffer Overflow in the IPv4 component. There is an IPNET security vulnerability: Stack overflow in the parsing of IPv4 packets’ IP options.

Wind River VxWorks 6.6, 6.7, 6.8, 6.9.3, 6.9.4, and Vx7 has Incorrect Access Control in IPv4 assignment by the ipdhcpc DHCP client component.

When RPC is enabled in Wind River VxWorks 6.9 prior to 6.9.1, a specially crafted RPC request can trigger an integer overflow leading to an out-of-bounds memory copy. It may allow remote attackers to cause a denial of service (crash) or possibly execute arbitrary code.

Integer overflow in the _authenticate function in svc_auth.c in Wind River VxWorks 5.5 through 6.9.4.1, when the Remote Procedure Call (RPC) protocol is enabled, allows remote attackers to cause a denial of service (crash) or possibly execute arbitrary code via a username and password.

Wind River VxWorks before 5.5.1, 6.5.x through 6.7.x before 6.7.1.1, 6.8.x before 6.8.3, 6.9.x before 6.9.4.4, and 7.x before 7 ipnet_coreip 1.2.2.0, as used on Schneider Electric SAGE RTU devices before J2 and other devices, does not properly generate TCP initial sequence number (ISN) values, which makes it easier for remote attackers to spoof TCP sessions by predicting an ISN value.

The web server in Wind River VxWorks 5.5 through 6.9 allows remote attackers to cause a denial of service (daemon crash) via a crafted URI.

The WebCLI component in Wind River VxWorks 5.5 through 6.9 allows remote authenticated users to cause a denial of service (CLI session crash) via a crafted command string.

IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote attackers to execute arbitrary code or cause a denial of service (daemon hang) via a crafted public-key authentication request.

IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote authenticated users to cause a denial of service (daemon outage) via a crafted pty request.

IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote authenticated users to cause a denial of service (daemon outage) via a crafted packet.

IPSSH (aka the SSH server) in Wind River VxWorks 6.5 through 6.9 allows remote attackers to cause a denial of service (daemon outage) via a crafted authentication request.

The FTP daemon in Wind River VxWorks does not close the TCP connection after a number of failed login attempts, which makes it easier for remote attackers to obtain access via a brute-force attack.

The loginDefaultEncrypt algorithm in loginLib in Wind River VxWorks before 6.9 does not properly support a large set of distinct possible passwords, which makes it easier for remote attackers to obtain access via a (1) telnet, (2) rlogin, or (3) FTP session.

The INCLUDE_SECURITY functionality in Wind River VxWorks 6.x, 5.x, and earlier uses the LOGIN_USER_NAME and LOGIN_USER_PASSWORD (aka LOGIN_PASSWORD) parameters to create hardcoded credentials, which makes it easier for remote attackers to obtain access via a (1) telnet, (2) rlogin, or (3) FTP session.

The WDB target agent debug service in Wind River VxWorks 6.x, 5.x, and earlier, as used on the Rockwell Automation 1756-ENBT series A with firmware 3.2.6 and 3.6.1 and other products, allows remote attackers to read or modify arbitrary memory locations, perform function calls, or manage tasks via requests to UDP port 17185, a related issue to CVE-2005-3804.

The IPv6 Neighbor Discovery Protocol (NDP) implementation in (1) FreeBSD 6.3 through 7.1, (2) OpenBSD 4.2 and 4.3, (3) NetBSD, (4) Force10 FTOS before E7.7.1.1, (5) Juniper JUNOS, and (6) Wind River VxWorks 5.x through 6.4 does not validate the origin of Neighbor Discovery messages, which allows remote attackers to cause a denial of service (loss of connectivity) or read private network traffic via a spoofed message that modifies the Forward Information Base (FIB).

Cross-site scripting (XSS) vulnerability in index.php in FTP Admin 0.1.0 allows remote attackers to inject arbitrary web script or HTML via the error parameter in an error page action.

Heap-based buffer overflow in libmpdemux/aviheader.c in MPlayer 1.0rc1 and earlier allows remote attackers to cause a denial of service (application crash) or possibly execute arbitrary code via a .avi file with certain large "indx truck size" and nEntriesInuse values, and a certain wLongsPerEntry value.

PHP remote file inclusion vulnerability in index.php in Achievo 1.1.0 allows remote attackers to execute arbitrary PHP code via a URL in the config_atkroot parameter.

formmail.php in Jetbox CMS 2.1 allows remote attackers to send arbitrary e-mails (spam) via modified recipient, _SETTINGS[allowed_email_hosts][], and subject parameters.

SQL injection vulnerability in directory.php in Super Link Exchange Script 1.0 might allow remote attackers to execute arbitrary SQL queries via the cat parameter.

Ezboo webstats, possibly 3.0.3, allows remote attackers to bypass authentication and gain access via a direct request to (1) update.php and (2) config.php.

Buffer overflow in Sendmail 5.79 to 8.12.7 allows remote attackers to execute arbitrary code via certain formatted address fields, related to sender and recipient header comments as processed by the crackaddr function of headers.c.

ICMP information such as (1) netmask and (2) timestamp is allowed from arbitrary hosts.