Linux CVEs & Vulnerabilities

In the Linux kernel, the following vulnerability has been resolved: net: do not pass flow_id to set_rps_cpu() Blamed commit made the assumption that the RPS table for each receive queue would have the same size, and that it would not change. Compute flow_id in set_rps_cpu(), do not assume we can use the value computed by get_rps_cpu(). Otherwise we risk out-of-bound access and/or crashes.

In the Linux kernel, the following vulnerability has been resolved: media: mtk-mdp: Fix error handling in probe function Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent resource leak. Add check for the return value of vpu_get_plat_device() to prevent null pointer dereference. And vpu_get_plat_device() increases the reference count of the returned platform device. Add platform_device_put() to prevent reference leak.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set() The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: validate num_ifs to prevent out-of-bounds write The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes() but never validates it against DPSW_MAX_IF (64). This value controls iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports num_ifs >= 64, the loop can write past the array bounds. Add a bound check for num_ifs in dpaa2_switch_init(). dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all ports match the flood filter, the loop fills all 64 slots and the control interface write overflows by one entry. The check uses >= because num_ifs == DPSW_MAX_IF is also functionally broken. build_if_id_bitmap() silently drops any ID >= 64: if (id[i] < DPSW_MAX_IF) bmap[id[i] / 64] |= ...

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6asm: drop DSP responses for closed data streams 'Commit a354f030dbce ("ASoC: qcom: q6asm: handle the responses after closing")' attempted to ignore DSP responses arriving after a stream had been closed. However, those responses were still handled, causing lockups. Fix this by unconditionally dropping all DSP responses associated with closed data streams.

In the Linux kernel, the following vulnerability has been resolved: atm: fore200e: fix use-after-free in tasklets during device removal When the PCA-200E or SBA-200E adapter is being detached, the fore200e is deallocated. However, the tx_tasklet or rx_tasklet may still be running or pending, leading to use-after-free bug when the already freed fore200e is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet(). One of the race conditions can occur as follows: CPU 0 (cleanup) | CPU 1 (tasklet) fore200e_pca_remove_one() | fore200e_interrupt() fore200e_shutdown() | tasklet_schedule() kfree(fore200e) | fore200e_tx_tasklet() | fore200e-> // UAF Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to synchronize with any pending or running tasklets. Moreover, since fore200e_reset() could prevent further interrupts or data transfers, the tasklet_kill() should be placed after fore200e_reset() to prevent the tasklet from being rescheduled in fore200e_interrupt(). Finally, it only needs to do tasklet_kill() when the fore200e state is greater than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized in earlier states. In a word, the tasklet_kill() should be placed in the FORE200E_STATE_IRQ branch within the switch...case structure. This bug was identified through static analysis.

In the Linux kernel, the following vulnerability has been resolved: fbdev: vt8500lcdfb: fix missing dma_free_coherent() fbi->fb.screen_buffer is allocated with dma_alloc_coherent() but is not freed if the error path is reached.

In the Linux kernel, the following vulnerability has been resolved: APEI/GHES: ARM processor Error: don't go past allocated memory If the BIOS generates a very small ARM Processor Error, or an incomplete one, the current logic will fail to deferrence err->section_length and ctx_info->size Add checks to avoid that. With such changes, such GHESv2 records won't cause OOPSes like this: [ 1.492129] Internal error: Oops: 0000000096000005 [#1] SMP [ 1.495449] Modules linked in: [ 1.495820] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.18.0-rc1-00017-gabadcc3553dd-dirty #18 PREEMPT [ 1.496125] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 02/02/2022 [ 1.496433] Workqueue: kacpi_notify acpi_os_execute_deferred [ 1.496967] pstate: 814000c5 (Nzcv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--) [ 1.497199] pc : log_arm_hw_error+0x5c/0x200 [ 1.497380] lr : ghes_handle_arm_hw_error+0x94/0x220 0xffff8000811c5324 is in log_arm_hw_error (../drivers/ras/ras.c:75). 70 err_info = (struct cper_arm_err_info *)(err + 1); 71 ctx_info = (struct cper_arm_ctx_info *)(err_info + err->err_info_num); 72 ctx_err = (u8 *)ctx_info; 73 74 for (n = 0; n < err->context_info_num; n++) { 75 sz = sizeof(struct cper_arm_ctx_info) + ctx_info->size; 76 ctx_info = (struct cper_arm_ctx_info *)((long)ctx_info + sz); 77 ctx_len += sz; 78 } 79 and similar ones while trying to access section_length on an error dump with too small size. [ rjw: Subject tweaks ]

In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink() functions struct configfs_item_operations callbacks are defined like the following: int (*allow_link)(struct config_item *src, struct config_item *target); void (*drop_link)(struct config_item *src, struct config_item *target); While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify the parameters in the correct order, pci_primary_epc_epf_unlink() and pci_secondary_epc_epf_unlink() specify the parameters in the wrong order, leading to the below kernel crash when using the unlink command in configfs: Unable to handle kernel paging request at virtual address 0000000300000857 Mem abort info: ... pc : string+0x54/0x14c lr : vsnprintf+0x280/0x6e8 ... string+0x54/0x14c vsnprintf+0x280/0x6e8 vprintk_default+0x38/0x4c vprintk+0xc4/0xe0 pci_epf_unbind+0xdc/0x108 configfs_unlink+0xe0/0x208+0x44/0x74 vfs_unlink+0x120/0x29c __arm64_sys_unlinkat+0x3c/0x90 invoke_syscall+0x48/0x134 do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0 [mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen]

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by replacing mlx5_query_mac_address() with ether_addr_copy() to get the local MAC address directly from netdev->dev_addr. The issue occurs because mlx5_query_mac_address() queries the hardware which involves mlx5_cmd_exec() that can sleep, but it is called from the mlx5e_ipsec_handle_event workqueue which runs in atomic context. The MAC address is already available in netdev->dev_addr, so no need to query hardware. This avoids the sleeping call and resolves the bug. Call trace: BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200 __schedule+0x7ab/0xa20 schedule+0x1c/0xb0 schedule_timeout+0x6e/0xf0 __wait_for_common+0x91/0x1b0 cmd_exec+0xa85/0xff0 [mlx5_core] mlx5_cmd_exec+0x1f/0x50 [mlx5_core] mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core] mlx5_query_mac_address+0x19/0x30 [mlx5_core] mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core] mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core] mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core] process_one_work+0x178/0x2e0 worker_thread+0x2ea/0x430

In the Linux kernel, the following vulnerability has been resolved: tcp: fix potential race in tcp_v6_syn_recv_sock() Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock() is done too late. After tcp_v4_syn_recv_sock(), the child socket is already visible from TCP ehash table and other cpus might use it. Since newinet->pinet6 is still pointing to the listener ipv6_pinfo bad things can happen as syzbot found. Move the problematic code in tcp_v6_mapped_child_init() and call this new helper from tcp_v4_syn_recv_sock() before the ehash insertion. This allows the removal of one tcp_sync_mss(), since tcp_v4_syn_recv_sock() will call it with the correct context.

In the Linux kernel, the following vulnerability has been resolved: netconsole: avoid OOB reads, msg is not nul-terminated msg passed to netconsole from the console subsystem is not guaranteed to be nul-terminated. Before recent commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure") the message would be placed in printk_shared_pbufs, a static global buffer, so KASAN had harder time catching OOB accesses. Now we see: printk: console [netcon_ext0] enabled BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240 Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594 CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9 Call Trace: kasan_report+0xe4/0x120 string+0x1f7/0x240 vsnprintf+0x655/0xba0 scnprintf+0xba/0x120 netconsole_write+0x3fe/0xa10 nbcon_emit_next_record+0x46e/0x860 nbcon_kthread_func+0x623/0x750 Allocated by task 1: nbcon_alloc+0x1ea/0x450 register_console+0x26b/0xe10 init_netconsole+0xbb0/0xda0 The buggy address belongs to the object at ffff88813b6d4000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 0 bytes to the right of allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00)

In the Linux kernel, the following vulnerability has been resolved: soc: ti: pruss: Fix double free in pruss_clk_mux_setup() In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np) on the error path. However, after the devm_add_action_or_reset() returns, the of_node_put(clk_mux_np) is called again, causing a double free. Fix by returning directly, to avoid the duplicate of_node_put().

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate user queue size constraints Add validation to ensure user queue sizes meet hardware requirements: - Size must be a power of two for efficient ring buffer wrapping - Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations This prevents invalid configurations that could lead to GPU faults or unexpected behavior.

In the Linux kernel, the following vulnerability has been resolved: net: consume xmit errors of GSO frames udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests currently in NIPA. They fail in the same exact way, TCP GRO test stalls occasionally and the test gets killed after 10min. These tests use veth to simulate GRO. They attach a trivial ("return XDP_PASS;") XDP program to the veth to force TSO off and NAPI on. Digging into the failure mode we can see that the connection is completely stuck after a burst of drops. The sender's snd_nxt is at sequence number N [1], but the receiver claims to have received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle is that senders rtx queue is not empty (let's say the block in the rtx queue is at sequence number N - 4 * MSS [3]). In this state, sender sends a retransmission from the rtx queue with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3]. Receiver sees it and responds with an ACK all the way up to N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA because it has no recollection of ever sending data that far out [1]. And we are stuck. The root cause is the mess of the xmit return codes. veth returns an error when it can't xmit a frame. We end up with a loss event like this: ------------------------------------------------- | GSO super frame 1 | GSO super frame 2 | |-----------------------------------------------| | seg | seg | seg | seg | seg | seg | seg | seg | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | ------------------------------------------------- x ok ok <ok>| ok ok ok <x> \\ snd_nxt "x" means packet lost by veth, and "ok" means it went thru. Since veth has TSO disabled in this test it sees individual segments. Segment 1 is on the retransmit queue and will be resent. So why did the sender not advance snd_nxt even tho it clearly did send up to seg 8? tcp_write_xmit() interprets the return code from the core to mean that data has not been sent at all. Since TCP deals with GSO super frames, not individual segment the crux of the problem is that loss of a single segment can be interpreted as loss of all. TCP only sees the last return code for the last segment of the GSO frame (in <> brackets in the diagram above). Of course for the problem to occur we need a setup or a device without a Qdisc. Otherwise Qdisc layer disconnects the protocol layer from the device errors completely. We have multiple ways to fix this. 1) make veth not return an error when it lost a packet. While this is what I think we did in the past, the issue keeps reappearing and it's annoying to debug. The game of whack a mole is not great. 2) fix the damn return codes We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the documentation, so maybe we should make the return code from ndo_start_xmit() a boolean. I like that the most, but perhaps some ancient, not-really-networking protocol would suffer. 3) make TCP ignore the errors It is not entirely clear to me what benefit TCP gets from interpreting the result of ip_queue_xmit()? Specifically once the connection is established and we're pushing data - packet loss is just packet loss? 4) this fix Ignore the rc in the Qdisc-less+GSO case, since it's unreliable. We already always return OK in the TCQ_F_CAN_BYPASS case. In the Qdisc-less case let's be a bit more conservative and only mask the GSO errors. This path is taken by non-IP-"networks" like CAN, MCTP etc, so we could regress some ancient thing. This is the simplest, but also maybe the hackiest fix? Similar fix has been proposed by Eric in the past but never committed because original reporter was working with an OOT driver and wasn't providing feedback (see Link).

In the Linux kernel, the following vulnerability has been resolved: nfsd: fix nfs4_file refcount leak in nfsd_get_dir_deleg() Claude pointed out that there is a nfs4_file refcount leak in nfsd_get_dir_deleg(). Ensure that the reference to "fp" is released before returning.

In the Linux kernel, the following vulnerability has been resolved: dm mpath: Add missing dm_put_device when failing to get scsi dh name When commit fd81bc5cca8f ("scsi: device_handler: Return error pointer in scsi_dh_attached_handler_name()") added code to fail parsing the path if scsi_dh_attached_handler_name() failed with -ENOMEM, it didn't clean up the reference to the path device that had just been taken. Fix this, and steamline the error paths of parse_path() a little.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35 [Why] A backport of the change made for DCN401 that addresses an issue where we turn off the PHY PLL when disabling TMDS output, which causes the OTG to remain stuck. The OTG being stuck can lead to a hang in the DCHVM's ability to ACK invalidations when it thinks the HUBP is still on but it's not receiving global sync. The transition to PLL_ON needs to be atomic as there's no guarantee that the thread isn't pre-empted or is able to complete before the IOMMU watchdog times out. [How] Backport the implementation from dcn401 back to dcn35. There's a functional difference in when the eDP output is disabled in dcn401 code so we don't want to utilize it directly.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_tcpmss: check remaining length before reading optlen Quoting reporter: In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads op[i+1] directly without validating the remaining option length. If the last byte of the option field is not EOL/NOP (0/1), the code attempts to index op[i+1]. In the case where i + 1 == optlen, this causes an out-of-bounds read, accessing memory past the optlen boundary (either reading beyond the stack buffer _opt or the following payload).

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-async: Fix error handling on steps after finding a match Once an async connection is found to be matching with an fwnode, a sub-device may be registered (in case it wasn't already), its bound operation is called, ancillary links are created, the async connection is added to the sub-device's list of connections and removed from the global waiting connection list. Further on, the sub-device's possible own notifier is searched for possible additional matches. Fix these specific issues: - If v4l2_async_match_notify() failed before the sub-notifier handling, the async connection was unbound and its entry removed from the sub-device's async connection list. The latter part was also done in v4l2_async_match_notify(). - The async connection's sd field was only set after creating ancillary links in v4l2_async_match_notify(). It was however dereferenced in v4l2_async_unbind_subdev_one(), which was called on error path of v4l2_async_match_notify() failure.

In the Linux kernel, the following vulnerability has been resolved: ceph: do not propagate page array emplacement errors as batch errors When fscrypt is enabled, move_dirty_folio_in_page_array() may fail because it needs to allocate bounce buffers to store the encrypted versions of each folio. Each folio beyond the first allocates its bounce buffer with GFP_NOWAIT. Failures are common (and expected) under this allocation mode; they should flush (not abort) the batch. However, ceph_process_folio_batch() uses the same `rc` variable for its own return code and for capturing the return codes of its routine calls; failing to reset `rc` back to 0 results in the error being propagated out to the main writeback loop, which cannot actually tolerate any errors here: once `ceph_wbc.pages` is allocated, it must be passed to ceph_submit_write() to be freed. If it survives until the next iteration (e.g. due to the goto being followed), ceph_allocate_page_array()'s BUG_ON() will oops the worker. Note that this failure mode is currently masked due to another bug (addressed next in this series) that prevents multiple encrypted folios from being selected for the same write. For now, just reset `rc` when redirtying the folio to prevent errors in move_dirty_folio_in_page_array() from propagating. Note that move_dirty_folio_in_page_array() is careful never to return errors on the first folio, so there is no need to check for that. After this change, ceph_process_folio_batch() no longer returns errors; its only remaining failure indicator is `locked_pages == 0`, which the caller already handles correctly.

In the Linux kernel, the following vulnerability has been resolved: xfs: delete attr leaf freemap entries when empty Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow"), Brian Foster observed that it's possible for a small freemap at the end of the end of the xattr entries array to experience a size underflow when subtracting the space consumed by an expansion of the entries array. There are only three freemap entries, which means that it is not a complete index of all free space in the leaf block. This code can leave behind a zero-length freemap entry with a nonzero base. Subsequent setxattr operations can increase the base up to the point that it overlaps with another freemap entry. This isn't in and of itself a problem because the code in _leaf_add that finds free space ignores any freemap entry with zero size. However, there's another bug in the freemap update code in _leaf_add, which is that it fails to update a freemap entry that begins midway through the xattr entry that was just appended to the array. That can result in the freemap containing two entries with the same base but different sizes (0 for the "pushed-up" entry, nonzero for the entry that's actually tracking free space). A subsequent _leaf_add can then allocate xattr namevalue entries on top of the entries array, leading to data loss. But fixing that is for later. For now, eliminate the possibility of confusion by zeroing out the base of any freemap entry that has zero size. Because the freemap is not intended to be a complete index of free space, a subsequent failure to find any free space for a new xattr will trigger block compaction, which regenerates the freemap. It looks like this bug has been in the codebase for quite a long time.

In the Linux kernel, the following vulnerability has been resolved: ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data() On the receive path, __ioam6_fill_trace_data() uses trace->nodelen to decide how much data to write for each node. It trusts this field as-is from the incoming packet, with no consistency check against trace->type (the 24-bit field that tells which data items are present). A crafted packet can set nodelen=0 while setting type bits 0-21, causing the function to write ~100 bytes past the allocated region (into skb_shared_info), which corrupts adjacent heap memory and leads to a kernel panic. Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to derive the expected nodelen from the type field, and use it: - in ioam6_iptunnel.c (send path, existing validation) to replace the open-coded computation; - in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose nodelen is inconsistent with the type field, before any data is written. Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to 0xff1ffc00).

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix signededness bug in smb_direct_prepare_negotiation() smb_direct_prepare_negotiation() casts an unsigned __u32 value from sp->max_recv_size and req->preferred_send_size to a signed int before computing min_t(int, ...). A maliciously provided preferred_send_size of 0x80000000 will return as smaller than max_recv_size, and then be used to set the maximum allowed alowed receive size for the next message. By sending a second message with a large value (>1420 bytes) the attacker can then achieve a heap buffer overflow. This fix replaces min_t(int, ...) with min_t(u32)

In the Linux kernel, the following vulnerability has been resolved: rnbd-srv: Zero the rsp buffer before using it Before using the data buffer to send back the response message, zero it completely. This prevents any stray bytes to be picked up by the client side when there the message is exchanged between different protocol versions.

In the Linux kernel, the following vulnerability has been resolved: media: cx25821: Fix a resource leak in cx25821_dev_setup() Add release_mem_region() if ioremap() fails to release the memory region obtained by cx25821_get_resources().

In the Linux kernel, the following vulnerability has been resolved: media: ccs: Avoid possible division by zero Calculating maximum M for scaler configuration involves dividing by MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably non-zero, the driver was missing the check it in fact was. Fix this.

In the Linux kernel, the following vulnerability has been resolved: gpio: sysfs: fix chip removal with GPIOs exported over sysfs Currently if we export a GPIO over sysfs and unbind the parent GPIO controller, the exported attribute will remain under /sys/class/gpio because once we remove the parent device, we can no longer associate the descriptor with it in gpiod_unexport() and never drop the final reference. Rework the teardown code: provide an unlocked variant of gpiod_unexport() and remove all exported GPIOs with the sysfs_lock taken before unregistering the parent device itself. This is done to prevent any new exports happening before we unregister the device completely.

In the Linux kernel, the following vulnerability has been resolved: net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls netif_stop_queue() and netif_wake_queue(). These are TX queue flow control functions unrelated to RX multicast configuration. The premature netif_wake_queue() can re-enable TX while tx_urb is still in-flight, leading to a double usb_submit_urb() on the same URB: kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); } kaweth_set_rx_mode() { netif_stop_queue(); netif_wake_queue(); // wakes TX queue before URB is done } kaweth_start_xmit() { netif_stop_queue(); usb_submit_urb(kaweth->tx_urb); // URB submitted while active } This triggers the WARN in usb_submit_urb(): "URB submitted while active" This is a similar class of bug fixed in rtl8150 by - commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast"). Also kaweth_set_rx_mode() is already functionally broken, the real set_rx_mode action is performed by kaweth_async_set_rx_mode(), which in turn is not a no-op only at ndo_open() time.

In the Linux kernel, the following vulnerability has been resolved: erofs: fix incorrect early exits for invalid metabox-enabled images Crafted EROFS images with metadata compression enabled can trigger incorrect early returns, leading to folio reference leaks. However, this does not cause system crashes or other severe issues.

In the Linux kernel, the following vulnerability has been resolved: procfs: fix possible double mmput() in do_procmap_query() When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY we return with -ENAMETOOLONG error. After recent changes this condition happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(), so original goto out is now wrong and will double-mmput() mm_struct. Fix by jumping further to clean up only vm_file and name_buf.

In the Linux kernel, the following vulnerability has been resolved: media: ipu6: Fix RPM reference leak in probe error paths Several error paths in ipu6_pci_probe() were jumping directly to out_ipu6_bus_del_devices without releasing the runtime PM reference. Add pm_runtime_put_sync() before cleaning up other resources.

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw89: pci: validate release report content before using for RTL8922DE The commit 957eda596c76 ("wifi: rtw89: pci: validate sequence number of TX release report") does validation on existing chips, which somehow a release report of SKB becomes malformed. As no clear cause found, add rules ahead for RTL8922DE to avoid crash if it happens.

In the Linux kernel, the following vulnerability has been resolved: clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841 The 9FGV0841 has 8 outputs and registers 8 struct clk_hw, make sure there are 8 slots for those newly registered clk_hw pointers, else there is going to be out of bounds write when pointers 4..7 are set into struct rs9_driver_data .clk_dif[4..7] field. Since there are other structure members past this struct clk_hw pointer array, writing to .clk_dif[4..7] fields corrupts both the struct rs9_driver_data content and data around it, sometimes without crashing the kernel. However, the kernel does surely crash when the driver is unbound or during suspend. Fix this, increase the struct clk_hw pointer array size to the maximum output count of 9FGV0841, which is the biggest chip that is supported by this driver.

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix post open error handling Closing a queue doesn't guarantee that all associated page pools are terminated right away, let the refcounting do the work instead of releasing the zcrx ctx directly.

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: xscale: Check for PTP support properly In ixp4xx_get_ts_info() ixp46x_ptp_find() is called unconditionally despite this feature only existing on ixp46x, leading to the following splat from tcpdump: root@OpenWrt:~# tcpdump -vv -X -i eth0 (...) Unable to handle kernel NULL pointer dereference at virtual address 00000238 when read (...) Call trace: ptp_clock_index from ixp46x_ptp_find+0x1c/0x38 ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64 ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108 __ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648 __dev_ethtool from dev_ethtool+0x160/0x234 dev_ethtool from dev_ioctl+0x2cc/0x460 dev_ioctl from sock_ioctl+0x1ec/0x524 sock_ioctl from sys_ioctl+0x51c/0xa94 sys_ioctl from ret_fast_syscall+0x0/0x44 (...) Segmentation fault Check for ixp46x in ixp46x_ptp_find() before trying to set up PTP to avoid this. To avoid altering the returned error code from ixp4xx_hwtstamp_set() which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter the error code. The helper function ixp46x_ptp_find() helper returns -ENODEV.

In the Linux kernel, the following vulnerability has been resolved: reset: gpio: suppress bind attributes in sysfs This is a special device that's created dynamically and is supposed to stay in memory forever. We also currently don't have a devlink between it and the actual reset consumer. Suppress sysfs bind attributes so that user-space can't unbind the device because - as of now - it will cause a use-after-free splat from any user that puts the reset control handle.

In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Fix NULL pointer dereference If there's a mismatch between the DAI links in the machine driver and the topology, it is possible that the playback/capture widget is not set, especially in the case of loopback capture for echo reference where we use the dummy DAI link. Return the error when the widget is not set to avoid a null pointer dereference like below when the topology is broken. RIP: 0010:hda_dai_get_ops.isra.0+0x14/0xa0 [snd_sof_intel_hda_common]

In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB.

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Add missing unmap in snd_cx23885_hw_params() In error path, add cx23885_alsa_dma_unmap() to release the resource acquired by cx23885_alsa_dma_map().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE.

In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Always use vmcb01 in VMLOAD/VMSAVE emulation Commit cc3ed80ae69f ("KVM: nSVM: always use vmcb01 to for vmsave/vmload of guest state") made KVM always use vmcb01 for the fields controlled by VMSAVE/VMLOAD, but it missed updating the VMLOAD/VMSAVE emulation code to always use vmcb01. As a result, if VMSAVE/VMLOAD is executed by an L2 guest and is not intercepted by L1, KVM will mistakenly use vmcb02. Always use vmcb01 instead of the current VMCB.

In the Linux kernel, the following vulnerability has been resolved: dm-verity: correctly handle dm_bufio_client_create() failure If either of the calls to dm_bufio_client_create() in verity_fec_ctr() fails, then dm_bufio_client_destroy() is later called with an ERR_PTR() argument. That causes a crash. Fix this.

In the Linux kernel, the following vulnerability has been resolved: drm/amd/pm: Fix null pointer dereference issue If SMU is disabled, during RAS initialization, there will be null pointer dereference issue here.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Flush dev-IOTLB only when PCIe device is accessible in scalable mode Commit 4fc82cd907ac ("iommu/vt-d: Don't issue ATS Invalidation request when device is disconnected") relies on pci_dev_is_disconnected() to skip ATS invalidation for safely-removed devices, but it does not cover link-down caused by faults, which can still hard-lock the system. For example, if a VM fails to connect to the PCIe device, "virsh destroy" is executed to release resources and isolate the fault, but a hard-lockup occurs while releasing the group fd. Call Trace: qi_submit_sync qi_flush_dev_iotlb intel_pasid_tear_down_entry device_block_translation blocking_domain_attach_dev __iommu_attach_device __iommu_device_set_domain __iommu_group_set_domain_internal iommu_detach_group vfio_iommu_type1_detach_group vfio_group_detach_container vfio_group_fops_release __fput Although pci_device_is_present() is slower than pci_dev_is_disconnected(), it still takes only ~70 µs on a ConnectX-5 (8 GT/s, x2) and becomes even faster as PCIe speed and width increase. Besides, devtlb_invalidation_with_pasid() is called only in the paths below, which are far less frequent than memory map/unmap. 1. mm-struct release 2. {attach,release}_dev 3. set/remove PASID 4. dirty-tracking setup The gain in system stability far outweighs the negligible cost of using pci_device_is_present() instead of pci_dev_is_disconnected() to decide when to skip ATS invalidation, especially under GDR high-load conditions.

In the Linux kernel, the following vulnerability has been resolved: ima: verify the previous kernel's IMA buffer lies in addressable RAM Patch series "Address page fault in ima_restore_measurement_list()", v3. When the second-stage kernel is booted via kexec with a limiting command line such as "mem=<size>" we observe a pafe fault that happens. BUG: unable to handle page fault for address: ffff97793ff47000 RIP: ima_restore_measurement_list+0xdc/0x45a #PF: error_code(0x0000) not-present page This happens on x86_64 only, as this is already fixed in aarch64 in commit: cbf9c4b9617b ("of: check previous kernel's ima-kexec-buffer against memory bounds") This patch (of 3): When the second-stage kernel is booted with a limiting command line (e.g. "mem=<size>"), the IMA measurement buffer handed over from the previous kernel may fall outside the addressable RAM of the new kernel. Accessing such a buffer can fault during early restore. Introduce a small generic helper, ima_validate_range(), which verifies that a physical [start, end] range for the previous-kernel IMA buffer lies within addressable memory: - On x86, use pfn_range_is_mapped(). - On OF based architectures, use page_is_ram().

In the Linux kernel, the following vulnerability has been resolved: RDMA/umem: Fix double dma_buf_unpin in failure path In ib_umem_dmabuf_get_pinned_with_dma_device(), the call to ib_umem_dmabuf_map_pages() can fail. If this occurs, the dmabuf is immediately unpinned but the umem_dmabuf->pinned flag is still set. Then, when ib_umem_release() is called, it calls ib_umem_dmabuf_revoke() which will call dma_buf_unpin() again. Fix this by removing the immediate unpin upon failure and just let the ib_umem_release/revoke path handle it. This also ensures the proper unmap-unpin unwind ordering if the dmabuf_map_pages call happened to fail due to dma_resv_wait_timeout (and therefore has a non-NULL umem_dmabuf->sgt).

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix circular locking dependency in run_unpack_ex Syzbot reported a circular locking dependency between wnd->rw_lock (sbi->used.bitmap) and ni->file.run_lock. The deadlock scenario: 1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock. 2. run_unpack_ex() takes wnd->rw_lock then tries to acquire ni->file.run_lock inside ntfs_refresh_zone(). This creates an AB-BA deadlock. Fix this by using down_read_trylock() instead of down_read() when acquiring run_lock in run_unpack_ex(). If the lock is contended, skip ntfs_refresh_zone() - the MFT zone will be refreshed on the next MFT operation. This breaks the circular dependency since we never block waiting for run_lock while holding wnd->rw_lock.